View Full Version : HORN KIT INSTALL HELP
06-04-2008, 07:15 AM
Does anyone have a GOOD drawing/ instructions for installing a horn button kit using a 1957 Bel Air 15" (stock/cutdown) steering wheel?? I have the drawing that came with the kit but still can't figure out where the metal disc, plastic pieces, etc. go--neighbors are getting MAD!!
06-04-2008, 10:07 AM
The 15" wheel uses the same type and sequence of parts as the stock wheel. Here is a previous post with a picture of the part sequence. http://www.trifive.com/forums/showthread.php?t=8648&highlight=horn Note that Ratfink had trouble with the washer under the steering wheel nut was to big and contacting the bellville spring. Also make sure that the leggs of the 3 legged thing is going through the large holes in the bellville spring and not holding it down so it makes contact when it shouldn't.
06-04-2008, 02:04 PM
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.