how to install door glass

[bjames]

I was wondering if anyone has any info on how to install new door glass on a 56 sedan 210?

[57viper]

Bob: Check your mailbox for a couple articles, hope they help.
Bob

[Ari]

Bob: Check your mailbox for a couple articles, hope they help.
Bob

Can you send a few of those this way as well? I'd appreciate it.

[57viper]

You got um Ari.
Bob

[langford_hotrods]

Can I get that article too:D:D:D thanks

[Jim Hall]

Please send me one too:) Thank You-Jim

[57viper]

You got it boys and girls.
Bob

[huntest]

I am putting new glass and new quarter panel / door mechanisms in my car. I could use this inormation as well!

thanks:)

[57viper]

You got it Dave.
Bob

[Randy 57]

Man Bob you got a full time job here:D I don't need them, well not right now, besides I'll just have to invite you over for dinner and see how they go in;)

Randy

[57viper]

Thanks Randy but I don't have time for dinner the fight for truth, justice and the American way keeps me busy--- wait that's not my slogan, to protect and serve, that's not it either, I'm confused, drive those Chevys like you stole em and be careful out there.
Bob

[Frisco 57]

Bob,

I was one of the guys requesting your glass installion articles last fall. Installing side glass and whisker channel was on of last winter's projects. Your "How to" articles helped greatly. Thank you very much.

[joe]

yes bob
you are a great help


thanks joe (ill be back)

[63chevytoo]

Yes Bob, the last article you sent me helped a lot.
When I am ready to install glass I will request that also.

Thanx
Don

[57viper]

You're all very welcome.
Bob

[racsan2448]

Hi Bob

Could you send me the glass install article? Glad this came up. I am just starting to work on my doors. Thanks in advance.:)

[grandmas55]

I replaced the windshield as well as both door glass when I had Grandma's '55 apart for paint and body work. I bought the complete channel/fuzzys/screw kit from Danchuk and used instructions from Eckler's catalog. Glass is nice and tight with no rattles and windows roll up and down beautifully. I redid the wing-window seals while the doors were apart with new Danchuk gaskets and rubber stops. The Danchuk vent seals fit very well, but the windshield and back glass gaskets are a little large. Mark

[57viper]

You got it Jeff.
Bob

[racsan2448]

Thanks Bob.

You read my mind. I was just about to ask you about the window channel install article, but you already sent it. Many thanks:)

[JohnnyJJ]

hello bob! i'm new to the site.this was the first subject I clicked on. I need to replace the glass and the channels in my car, can you send me those articles aswell? I would appreciate it!!
thank you
John

[johnny99]

I would also like to thank Bob. Two days before a car show I had an appointment with a glass guy to do my side glass in my 56 in my shop, I tore the seats, door panels, and glass out to make it easier for the guy. Guess what, he blew we off:mad:! Bob shot me the glass install stuff chop chop and I was able to do it myself:)! Thanks again Bob. John

[57viper]

hello bob! i'm new to the site.this was the first subject I clicked on. I need to replace the glass and the channels in my car, can you send me those articles aswell? I would appreciate it!!
thank you
John

Welcome to all you new guys, I gladly share my collection of tech articles with you guys but when I get reguests for articles in general terms like this one it's kinda hard to guess what model car you're working on and I think it would benifit both you and me if you download the master list from my website below and pick the articles you want by title and date, that way you get exactly what you need and I don't get replies like those were the wrong articles.
Bob

[JohnnyJJ]

Thanks Bob!
I guess telling you all of that would have been more helpful, its a 57' 210 4 door sedan. I need to replace drivers and passenger front door glass and channels/weather strip all 4 windows. i looked at your master list and I think I need the sedan side glass install of Oct. 86? also the vent window resto of sept 82 would be nice
Thank You!
John

[GBP]

And I could use the information.

thanks in advance

[bigbopper]

Bob: Check your mailbox for a couple articles, hope they help.
Bob

Hello Bob, I plan on installing the door and Quarter glass on my 1957 150 2dr sedan next week and would love to have your tech articles to assist in the installation. Thank You in advance, Mike

[57viper]

Mike your articles are on their way but Gary Gary Gary did you not read the post above from me? I don't know what you want.
Bob

[tikitrash]

Bob, I'm sorry to jump on this bandwagon....but if you have an article for a '56 4 door sedan...thanks again!

[mic55hael]

You have a wealth of knowledge at your site, I'd like get the following articals
I have a 55 chevy bel air hardtop & the info will be a great help . Thanks in advance.....

sub cat DOORS
Jul 77 doors shimming & adjusting
Jan 78 weatherstrip installation

sub cat GLASS
sept 85 side glass (hdtp/conv) installation

sub cat WIRING
mar 75 body wiring (55)

once again thanx Mike

[57viper]

Clay & Mike your articles should be in your mailbox as of ________now.
Bob

[GBP]

Bob, my error....
55 2 door post. Need to replace the door, windwing, and rear quarter glass along with the channel and felts.

thanks again

[belairbob1957]

Hi B0B can you also send me info on how to install side glass on a 1957 210 4dr sedan i am from england,i have just found this website it is a absolutely brilliant and you sound like one of the main men with all the info kind regards Bob:D:D:D:D:D:D:D:D

[57viper]

Welcome aboard Bob, unless there's a traffic jam in cyber space your article should be in your mailbox.
Good luck
Bob

[dasmith]

Bob,

I'm new to TriFive and was searching for help on removing the door glass on my 1956 Townsman wagon. I see you have an extensive library of articles and have been kind enough to email the articles to fellow TriFivers. Any help greatly appreciated.

[gene56]

Guys, any way we could put this in the arcives for all to share. A bunch of us will be needing this info for a long time to come.

Must be some where we could store it to be readily available.:tu

Gene

[gene56]

I'm thinking we need a tech arcive for all the good stuff to be easily acessed.
Like on the HAMB.
Hey Otis!:tu

Gene

[57viper]

David: Check your mailbox.
Bob

[dasmith]

Bob,

Got the articles. Thanks. I reallly appreciate your time and effort.

Dave

[gazztan]

Hi Bob,

Greetings from Australia!!
Could I please get a copy of your tech article for side glass installation into a 1955 Hardtop. The help would be much appreciated.:D
Thanks mate.
Regards

Gary.

[57viper]

consider it done Gary.
Bob

[dstrbd71]

I would also like this article for window install on a 56 sedan post 2 dr.

[LarryH]

Bob, could you shoot me that article when you get time? I'll be doing the front and rears on my '56 4 door.

Looks like you have a bunch of great tech there. Ever think about doing a HOW TO book?

[57viper]

Larry and "JOE" your articles are in your mailboxes, as far as a book goes all these past issues of Classic Chevy and whatever they have changed it to now are as far as I know still available from CCI but to duplicate my collection would be very expensive, I have subscribed for the last thirty something years and was able to track down the issues I'd missed over the years and I share these with my friends on tri-5 as if you all lived next door, I would love to be able to profit from the work and time I've put in over the years but to my understanding that would be illegal.
Fellow Chevy lover
Bob

[LarryH]

Thanks Bob. That article should help a bunch. I guess it would be a tad expensive to reproduce all those articles. I never even thought about the copy right problems.

[cruzn57]

since I did my windows and they have come loose , I guess now its time to ask for instructions, LOL
so, can I have a copy of those also?
please send them to cruzn57@yahoo.com

many thanks!

[57viper]

since I did my windows and they have come loose , I guess now its time to ask for instructions, LOL
so, can I have a copy of those also?
please send them to cruzn57@yahoo.com

many thanks!

Since you don't use your name or have pictures in your garage I have no idea what you're working on so I don't know what articles to send, I don't know if you've looked at the master list but it's quite large and the more specific you can be the better it is for both of us.
Bob

[TSOTO1955]

Do u have info. on 55 chev. bel air hardtop window installation as well ?

[57viper]

Tony: Do me a huge favor and look at the tech list on my web site below or better yet download it to your computer for future reference and then tell me which articles you want.Thanks
Bob

[cruzn57]

working on 57 210 post, power windows, (aftermarket)
thanks

[Blt2Lst]

Tony: Do me a huge favor and look at the tech list on my web site below or better yet download it to your computer for future reference and then tell me which articles you want.Thanks
Bob

Hey 57viper

I will be replacing the rear glass channel in my 57 BA 2dr sedan.
I recieved the part from Danchuck along with the rubber.
Their instructions say to use weatherstrip adhesive to hold the glass with rubber to the channel but do you also use it to hold the rubber to the glass?
I am hoping your article addresses this, so if you could, please foward me a copy of the article before i ask any other ?

Thanks

Al

[57viper]

Sorry Al I have to have your e-mail address to send articles and a title and date would be most helpful.
Bob

[Blt2Lst]

Sorry Al I have to have your e-mail address to send articles and a title and date would be most helpful.
Bob

amm9260@yahoo.com

Thanks

Al

[dave lewis]

Hi Bob. New member here . I am working on a 57 nomad and having a terrible time with the door window glass and roof rail install. I have adjusted the windows back and forth as much as possible and it still will not allow the window to roll up all the way with the doors closed.
Any tech help from your archive would be greatly appreciated.
Dave Lewis
57 nomad
Door glass / roof rail weatherstrip
leftturndave@aol.com

Thanks for your help!:D

[57viper]

Hey Dave; I looked all through my articles and I have nothing on the Nomad door glass, would any other articles help you out, look through the list below and if you see any that you think would help let me know, contact me via e-mail so I'm sure to get it.
Bob

[dave lewis]

Thanks Bob . Email sent !:D

[Matts56]

Bob, Im trying to put my 56 back together. Would you be so kind as to send me the Know how as well. If you have anything for front and rear glass that would be great. I read the one under the stock page but it didnt make much sense to me. I am not the one who took the car apart, so I am basically starting off with no knowledge at all. Pictures would help if they are available...:D Thanks a bunch!
Matt:cool:

[moorehoose]

I've got a 57 sedan or two door post model, and i can't figure out how to take the side glass out. any help would be great.
Thanks,
Robert

[57viper]

Check your mailbox.
Bob

[naveira]

Hi Bob, I just found this thread and need help on a 55 Bel Air 4dr sedan I just picked up and hope to make it into a daily driver. Your article resource looks great. If not too much trouble, I would appreciate the following articles:
Bulbs-Finding the right bulb-Feb 94
Glass-5-7 4dr side glass & whisker installation-Feb. 04
Sedan quarter window area-resoration Feb. 90
Vent window restoration- Sept. 82
5-7 front & rear glass installation- Feb. 06
Front door windows- Feb 75
Rear End-Rear end gear rebuild- Aug 92
Wiring-Body wiring (55)-Mar. 75
Four way flasher install- Nov. 08

Well, that should do it for now. I know it is a long list and I truly appreciate your help. Thank you in advance. Email is naveira@iwon.com.

[57viper]

Welcome aboard "JOE" what's your name and where is home for you, that's quite a list for your first post so you should be busy for awhile, your articles are in your mailbox.
Merry Christmas
Bob

[naveira]

Thanks for the quick reply Bob. My name is Jose and I live in Austin, Texas. I have done several frame up restorations in the past (73 Mustang convert, 64 1/2 Mustang, 79 Jeep, etc..). I currently have a 27 Ford Model T Touring Hot Rod which is finished, although, a true hot rod is never finished!!! Anyway, I needed something new to keep me busy and decided I really liked the 55s but due to $ limits and family size (2 daughters), I picked up a 55 4dr, 6cyl, 3spd on column, "not running", 3 weeks ago. I have already got it running and have completely redone the brakes (disc front/stock back). I am now moving onto the complete front steering and suspension while I await my electrical system which is on order. Hope to get on the road asap since I am tired of driving my boring new cars! :)

Merry Christmas to you too! Take care.

[LarryH]

Welcome aboard Jose. Moore doors make great cruisers.

[Mikey57]

I could sure use the help with restoration articles. Is there a list of articles or do I just pose the quetioin when I need information?

My current task is to remove my side windows in my 57 2dr HT Belair with the intentions of having them rechromed, replacing the rubber and whiskers. I need to the HOW and the pitfalls to avoid....and is it possible to save the glass, rather than replace.

Thank you ahead of time for being available.

[jason mccarty]

Can I get that article too thanks

[trifive]

Here is a link to Bob's website and the tech articles.

http://www.trifive.com/webs/57viper/articles.htm


Thanks Bob for all the help and hard work you have done over the years to collect and save and share the articles.


Thanks

otis:)

[57viper]

Thanks Otis, Mikey and Jason were you guys able to download the master list? if so drop me a line via e-mail listing the articles you want and I'll get them right out.
Happy new year guys.
Bob

[57viper]

As stated above send an e-mail to me @ 1bobis@comcast.net telling me which articles you want by listing them by title and date and I'll send them ASAP.
Bob

[drew57]

As stated above send an e-mail to me @ 1bobis@comcast.net telling me which articles you want by listing them by title and date and I'll send them ASAP.
Bob

Hey Bob,


You've got to figure out a way to make the articles you send to the guys count as a post..you'd be the man.

Hope all is well..:tu

andy

[Wayne 57 Chev]

bob Ive got a 57 two door rear glass has a crack. Will your info help me if so please pass it on.....:D Thanx Wayne

[57viper]

Wayne what kind of help you lookin for we can't fix cracks yet.
Bob

[56gasser530]

think you could send me that article too? thanks

[57viper]

Which article you talking about, I'll send a copy of the master list so you can tell me which articles you want.
Bob

[56gasser530]

cool thanks

[Bowtie55]

57 viper-

Can you send me the article to replace all the glass in my 55 2dr sedan?


Thanks

Matt

[Jim Hall]

57 viper-yea its me again. Thanks for sending me the info-but-I got crazy with the delete button and lost them.:o Could you send to me again?:confused: Thanks

[rudedog]

One day old new member, dont want to be a pest but i too could really use tech infor on side glass installation on my 56 since i took over this project and the hardware and glass was already removed. Thanks in advance for your help. This site is awesome. Thanks Rudedog

[57viper]

Glenn: Whats you working on buddy sedan or hardtop?
Bob

[Gary Blake]

Since this thread is still alive, 55 2dr sedan RH back glass, all of my body/glass friends carry awfully large prybars. scares me, I'd be most grateful if you could add me to the list, at your convenience. Thanks!:)

[rudedog]

Hey Bob thanks for the reply sorry guess i left out some key info. my car is a 2dr sedan. you should be like the car guy of they year i have seen so many times in my short time with trifive your name helping others, thanks for all you do. Rudedog

[Gary Blake]

Thank you Bob, When I see you next time I'll roll my window down!:)

[luna 56]

Hello again Bob,
Can you please also send me the info on installing the door glass and felt. The last info you sent me on the windshield was fantastic. Thanks for sharing your knowledge.:tu Ray

[rudedog]

Hey Bob, man the specs. you sent are the best. This is my first to ask for help and the members are great. Thanks Bob for your help, these instructions are better than i could have imagined. One week old member and i have gained so much info to use and just reading the posts is really cool. Hope to be able to help others with what i know soon. Drive the 5's Rudedog

[naveira]

Hi Bob, thanks for the last batch of articles! I am moving on now to steering column and treating some rust around windshield and back window. Could you please send me the following...

Steering column removal Oct.84
Upper steering column - rebuild July 83
Windshield & Backglass installation Sept. 95

Thanks!

[luna 56]

Hello Bob,
I see that we are keeping you pretty busy. Is it possible to get the tech article on how to install door glass. Thanks,
------ Ray -----

[wattom]

Getting ready to put my 56 back together

[57viper]

Jose and Ray you guys should have your articles but "WATTOM'S" I see by your title you want something but for the life of me I can't figure out what, if yoall ecpect me to do the searching I need all the information I can get on what you are working on but on the other hand if you pick the articles you need from the library list and send an e-mail to me at 1bobis@comcast.net you will get exactly what you want.
Thanks Bob

[naveira]

You the Man, Bob! Thank you!!!

[bigbubba]

Hello new guy from Kansas here. I have a 1957 chevy 2 door post and i was wondering if you guys had any info on how to put the door glass in and the back side glass?

[potsos1]

I have a 56 150 I drove it last summer when I rolled up the side glass both sides cracked I have everything to replace both sides and I mean everything except for installation instructions I know you guys can help me out from the looks of this thread. thanks for your help george

[hensonjd]

Hey guys and i hate to be a bother but could i gett he info on putting in the side windows and a windsheild for my 55 2 door post. thanks

[57viper]

Since you guys are new I will tell you the best way to get articles is to send your request directly to my e-mail, if tri-5 hadn't notified me of your posts I probably would have missed them, I have included a copy of the master list for future reference.
Good luck
Bob

[big daddy]

Bob can you also send me some info on door window replacement also? When I roll my window down and then back up at times there will be a pop and when that is heard another crack will be in my side glass. Have to replace and fix the problem. Thanks for your help

[tetley]

Bob,
I registered at this site for my father who is currently restoring his 57 Chevy 2-door Sedan. He is having trouble with the sedan side glass installation and therefore I was wondering if you wouldn't mind sending along the guide information for:
Sedan Side Glass Installation Oct 86
Sedan Quarter Window Area - restoration Feb 90
I am not a car guy by any means so if you require further information, I'll have to pass it along to my Dad (who happens to not be a computer guy) :)

Thanks in advance!

[tetley]

A big thank you to Bob for sending along that info so promptly. Hopefully it'll help assist my father so he can finally re-install those windows. (the rest of the family is tired of hearing about the struggles...we can only handle so much window talk!) ;)

[AlwaysWantedA55]

Bob, I hate to pile-on, but I'd love a copy of those articles as well! If you don't like sending to AOL accounts (I think you've been frustrated before by the file size limits), please feel free to send to my work address. jleary@us.ibm.com

Thanks!

Jay

[Grumpy1957]

this thread should be renamed "bobs your buddy"... I too shall ask the Great Omnipitant Archive master for the tech articles for side glass on a 1957 4 door post. thanks to my tinter, my driver side front door glass needs to be replaced, and rather than break more before i know what i'm doing, I hope you'll grant this request and enlighten me with said knowledge...
Thanks Bob... for all you have and will help
Troy
Grumpystang@gmail.com

[auggie56]

Hi Bob. It's great what your doing for the membership and the hobby as a whole. I bought the tech books from Ecklers quite a while ago. Do you know if they are the same as what you have archive ?

[icody]

Hi Bob...I'm new to the site. Was also wondering if you could send me the articles on how to replace the Side windows on a 2 door sedan (1957). Seems I have a broken (Cracked Drivers side window in my 57 Belair Sedan).
Thanks
Icody

[elleka]

Bob, I am so glad to have found this thread! I need instructions for ALL my wagon's glass. I will go thru your library and send you an email. Thanks so much for all you do for us DIYer's.:tu

[chevman57]

Boy sure looks like Bob (57viper) has gottena lot of requests on this sublect.:D
Terry

[Todd_J]

Happy New Year Bob. Can you send me the article for 1957 4door side glass. Thanks for sharing with all of us...

Todd

[tjsdelivery]

Just got mine apart yesterday. The article sure helped. Thanks Bob.

[luckydog]

Bob,
Can I get your tech articles on install for all the side glass for a 57 210 2dr.

Thanks Bob!

Chris

[fran0216]

57Viper, can you please send me the instructions also. IM putting new whiskers/Channels. Thanks!!! :)

[57viper]

Just a general post, whenever an article is requested I send along a copy of the library list just in case someone isn't able to download the one from this site. The reason I do this is simple, not only can't I remember all you guys in most cases I have no idea what kind of car you have let alone if it has a post or not or how many doors it has. To the simple part if you send an e-mail to me with the title and date of the article or articles you want I don't have to guess about anything I simply go to my library files on my trusty Mac and click the ones you want so please follow this simple process and not only will it make my life easier you will get the exact articles you want.
Thanks Guys
Bob

[hotwls13]

Just sent you a e-mail. Thanks for doing this, I'm sure these will help in this crazy adventure.

Hopefully I didn't request too many articles. ;)

[Bow55Tie]

Hello Bob and everyone on tri-five, I'm proud to say that My dad and I are about to restore our first 55. Been waiting a long time to find the right car to make our "Classic Custom." Looks Like I found the right site to get advice and info. seems like a great family of fellow car guys on this forum.

If you can shoot me the tech article for a 55 2dr post? Going to be doing both the 1/4 and door glass, brought a fuzzie kit kit as well, just hope all goes well.... any help would be great.
thanks Bob

-Brian

bpatanjo@hotmail.com

[D.PHILLIPS]

Bob. could I get the instructions for installing the back glas in a 57 2dr. sedan. Thanks: djphillips_49@msn.com

[56chevyguy]

Bob could I get the instructions too! 1956 210

:D:D

thanks!!

[golfwaterton]

I also have a broken driver's door glass. Any info appreciated.

Thanks Blair:)

[UNCLE BUCK]

hi guys, first time on here, i am in the UK, and i am in the process of restoring my 56, i am after the info for replacing the door/side glass if at all poss ? thanks.. email flippincrazyuk@yahoo.co.uk thanks Neil

[carls 56]

hi guys, first time on here, i am in the UK, and i am in the process of restoring my 56, i am after the info for replacing the door/side glass if at all poss ? thanks.. email flippincrazyuk@yahoo.co.uk thanks Neil

:hello: hi neil and welcome. good to have you here. take a look in the library area on homepage. might be something there. :anim_25:

[golfwaterton]

Hi bob, you must be one of the busiest guys on this site! Could you please send me info for door glass and whiskers for a 4 door 57 belair wagon.

thanks in advance Blair

[deprice]

I also need the door glass removal article for a 1957 2dr 210 sorry to bother you with the request degprice@bellsouth.net

[garlatz]

Hey Bob, i would also like to view those window removal articles please,

Thanks,

Bill

[Booty]

Geez Bob, I hesitate to ask because you must be tired of forwarding all those articles :anim_44:, but; I'll ask anyway, just in case you're not. I would appreciate any articles on installing and adjusting glass in a '57 Bel Air 4 Door Hardtop (No Posts), Thank You in advance. :)

Email: slbootysbcglobal.net

[KDs56210]

Guess what I need Bob....56 2 dr 210 sport coupe, have what appears to be a broken weld on the rear of the drivers door glass track? Hope I can find another complete scissor mechanism in good shape, but when I do I sure will need that glass article! Thanks!

[USMCDAD]

could I get the window install articles also? Getting ready to put back together! This is for a 55 2 door sedan.

[57viper]

OK fellas I will be happy to send the articles you need but to make life easier for all of us please download a copy of the master list then send an e-mail to me with your request by title and date of the article you want. Trifive used to show members e-mail addresses until one guy didn't like it so rather than tell him to omit his address they decided to omit everyone's. If I can't get your e-mail address I can't send articles. I don't read every post of every thread so I will miss 99% of your requests on here. There is only one way this is going to work, E-MAIL not by posting not by PM I can't send articles through tri-5. I am trying to help everyone on tri-5 but I'm afraid it has to be done one way for it to work. Thanks for understanding I hope.
Bob....57viper.....1bobis@comcast.net

[55blackone]

I'm sure i'm not going to be the last. How about for a 55 sadan?
Thanks,

[57viper]

I'm sure i'm not going to be the last. How about for a 55 sadan?
Thanks,

Did you miss the post just before yours or not read it all the way through?
I HAVE TO HAVE YOUR E-MAIL ADDRESS AND TRI-5 DOESN'T SHOW IT ANYMORE.

[Promotive]

hello bob! i'm new to the site.this was the first subject I clicked on. I need to replace the glass and the channels in my car, can you send me those articles aswell? I would appreciate it!!
thank you
John

Could I get a copy too? Thanks!

[mikes55]

Along with the long list of others, i also need to replace my 2dr 55's driver and passenger door glass (and the drivers rear glass :) ). May I also get a copy?

Thanks,
Mike

[57viper]

Could I get a copy too? Thanks!

I must have your e-mail address in order to send these articles to you.

[56dms]

Hate to bother you but I could also use this info. I have one that is cracked and I need to replace it.

E-Mail address is --- doug.slay@att.net


Thanks,
Doug

[stugotz]

could i get the link also please.

thx in advance

[57viper]

could i get the link also please.

thx in advance

As you can see from the previous post I must have your e-mail address to send the article to you.
Bob

[icody]

Hi Bob I have to replace the Drivers side front Door Window in my 57 210 Sedan. Can I get a copy of the How to Article as well? My email is: pbelanger@satx.rr.com.
Thanks in advance!!
Dave

[GCDC7]

CouldI also please get this onfo GCDCOMBS7@JUNO.COMThanks alot
Greg

[1GOPana]

Hello.
I was hoping you could send the article for a 57 chev conv glass install. My email is lifensd@hotmail.com. thanks.

[jrowe]

Wow Bob! You must be the most popular guy on TriFive.com. Your list of tech articles is incredible.

We would also appreciate assistance with glass installation for our 55 Bel Air Sedan. judyrowe@embarqmail.com.

[bgoodz]

Hi Bob,
Well, it looks like I could use those instructions also as the fur channel didn't turn out to will and I'm scratching my head trying to figure out how the fur channel secures along with the door glass fuzzy. Been too many years since I took it all apart. I saw mention about a screw kit for all the pieces. Anyway like someone said it's time to read some instructions and do it again. Got all the glass in but should re-do the fur channels.

If you would be so kind to send over I would appreciate it.

55 2dr Sedan
bgoodz@pacbell.net

Thanks very much.

Bill

[55 dream]

Can you please send it my way thank you
2 door sadan
Manolosarria@aol.com

[wdrich]

Hi, I'm attempting to install glass in the doors and the back of a 55 delray. Having not taken it apart, I find that I'm not sure if I have all of the pieces and tracks. Do you have a break down of the mechanisms and instructions for installation?
Thanks
Walt

[ndoyle]

Bob- I am doing a door/vent glass install on my 55 second series pickup. Any chance there's an article on this process? Thanks for any help. nick.v.doyle@gmail.com

[isky505]

Bob
Would it be possible for you to send me the door glass replacement instructions? Thank you Moe

roccus28@aol.com

[sideways55]

hate to bug ya bob!

whisker strip 55 hardtop feb '85

front door windows feb '75

5-7 2dr side glass & whisker install feb '04

if your ever in my neck of the woods come by and lemme buy u lunch or something, thanks!

[R TRI 5]

Bob
Would it be possible for you to send me the door glass replacement instructions? Thank you Moe

roccus28@aol.com

I would really appreciate having those articles as well. It's been two years dince I took it all out.

Thanks in advance for your help.:flag4:

[willysfan]

Bob,

Would it be possible to send me your instruction sheets on the door glass install and window chanel replace instructions. Thanks. dfacey@tampabay.rr.com

Dave

[Sheff]

Bob,
Could you send me the articles also, just starting on that install.
thanks Sheff

[hpnelson001]

One more time for the glass install. I want to do this right...thanks
Mike:blowtiedb:

[joe]

bob has been a great help to me in the past too
but if you go to ecklers site they have some downloads that will help you guys out

joe

[riverdog]

Could you semd me the sheet for a 56 210 sedan glass install . Thanks so much.:tu

[cscowen]

Hi Bob, I had the driver's glass on my 56 2 door post drop today and crack. Could I get your instructions for a replacement?

Thanks so much for your help

Chris

[jrl1954]

Could I get your instructions for a replacement? jrl1954@aol.com

[2Loose]

Been searching online for instructions on how to remove my 55 gasser's side glass, it's a four door, three of the windows are busted and need to come out, I have replacement glass. At the present I have the passenger side front door wind wing unbolted, loose, but still can't figure out how to get it out or how to get it loose enough to pull out the window glass and put in new glass. Haven't even looked at the rear doors yet!

Just found this thread, so if you can pass on any links where I can learn how to do this???

Was convinced I could figure it out once I got into it, but it has frustrated me, it's not immediately obvious!!!

Aloha,
Willy

Update:
Downloaded the list, very helpful...
Will email you my email address....
Willy

Update #2:
Just spent some time searching the Eckler's site, didn't find anything pertaining to tri five chevy sedans....
Corvettes and Chevelles, yeah....

[D.PHILLIPS]

Bob, could I get the sedan side glass install Oct 86. Thanks Doug djphillips_49@msn.com

[69steve]

Hi Bob could use any info on removal and refit of side glass for front doors and rear side glass on 56 210 .thanks steve

[Randy_M]

Bob -

Along with the first 100 people, I would appreciate it if you would forward the instructions for all of the side glass for a '55 2dr sedan (210). Thanks in advance. rmiller229@hotmail.com

[Babs57]

Hi Bob
If you have a chance, I could use tech info on removal and install of side glass for front doors and rear side glass on a 57 Chev 2 door hardtop . Very much appreciated for you time and patience. Thanks Paul
my email is- babs959@hotmail.com

[kevvyreno]

IM TRYING TO REPLACE A VENT WINDOW & WEATHER STRIPPING. COULD REALLY USE SOME HELP!! THANKS EMAIL: KEVVYRENO@AOL.COM

[hilltop55]

Hi Bob. Can I get some too!!! Thanks Lou

[57viper]

Hi Bob. Can I get some too!!! Thanks Lou

Hi Lou:
Since you're new to the site I will send a copy of the master list so you know what I have, in turn I need to know what you're working on before I start sending articles out cause I have articles for all models of tri-5s. Second please send your request to my e-mail cause it's easy to miss a post on the forum and I can only send these by e-mail and not through tri-5.com.
Bob

[quicksilver525]

hey bob could i please get a copy of how to install the glass in the right rear door in a 1957 4 door bel air with posts i also need the install and removal of the front passenger window and little window too please gotta get those replaced soon.

thanks xxblueeyes525xx@yahoo.com

[56Crazy]

Bob, I'm sorry to jump on this bandwagon....but if you have an article for a '56 4 door sedan...thanks again!
Hi Bob,
May I also join the queue and request same.
Regards
:/=:

[hotrodchevy]

Videos of the side glass install ,on site, would be a big help not just to BOb. Is there a place here that has Tech video links such as that?

[Gasoline Junkie]

Hi Bob, I've been putting off installing my windows can you send an article my way! Thanks in advance

[hpnelson001]

Bob,
you are the man. Got all that knowledge to share. Hope I'm doing this right by reading here and noting you ask for the tech articles from your master list. Here's what I need for 1957 chevy 150 2 door sedan:
Sedan side glass installation Oct.86
Sedan quarter window area - restoration Feb.90
Sedan whisker strip install art. 4, Feb. 07
Vent window restoration Sept.82

Getting close to putting in all new tinted windows on sides. Windshield installed by local glass company in two weeks. Already ordered, but I think I can do the side windows with your great tech articles. Thanks loads for being a great resource. send to realteam1999@sbcglobal.net
Best,
Mike

[hpnelson001]

Bob,
did you forget me? Haven't heard back on the tech articles I posted in need of...just making sure you didn't miss it..
thanks
Mike

[Old Willie]

Hey Bob, I have a 57 2 door sadan Belair and can use the articals on glass installation thank Bill:p3:

[garrettbowman]

I could also use this article please!

[Mikes56]

Just wanted to say thanks.. :congrats:to Bob for being so kind,to send those to every one! Me included...:tu will be a great help!

Mike

[garrettbowman]

I agree 110%. Bob is a great guy to take up his own time emailing us articles.


1 tip... loosen off those screws for the channels/regulators when installing the glass, i fought for a while with mine before I realized I forgot to do that.

[carls 56]

hi bob. could i get them too, please. thanks. :tu

[onebigdog]

Hey Bob, pretty please could I get a copy. I am putting my windows back in after being out for 10 years and I need help!!!! Thanks in advance.:p3::p2:

[otis57]

Hi,
I tried to restore my vent windows on my 57 Conv. but when it came to the "C" rubber well forget it I ruined it.
Could you please send me tech articles on the following.

Side Glass (Hdtp/Conv) installation Sept 85
Vent window Restoration Sept. 82
Conv 1/4 window install April 07

Thanks
Steve

[victor]

:flag6: can i also get the info :congrats:

[57viper]

Hey Bob, pretty please could I get a copy. I am putting my windows back in after being out for 10 years and I need help!!!! Thanks in advance.:p3::p2:

If I didn't send you the articles please send an e-mail directly to me with your request I don't see all the posts on tri-5. If I missed yours I appologise.
Bob

[57viper]

:flag6: can i also get the info :congrats:

Victor:
I saw your post but I have no idea what you're looking for, please send me an e-mail and I'll hook you up with whatever articles you need.
Thanks
Bob

[57 lover]

how do you remove and then install new glass in a 57 chevy belair 2 door post. include the vent window. HELP PLEASE

[Dano55]

Bob,
Would you be so kind as to send along articles:
Sedan side glass installation Oct.86
Vent window restoration Sept.82
Window channel (sedan) - installation Sept.83
Sedan whisker strip install art. 4 Feb. 07

Thanks so much!
Dano55
bowtie-trifive

[stevo's 55 & 57]

I have a 55 2 door sedan and I bought it with no windows or hardware. I have bought smoked glass and hardware online but can't figure out where it all goes. If you have anything that would help me that would be awesome. Thank you much in advance Bob...bowtie-trifive

[57viper]

I have a 55 2 door sedan and I bought it with no windows or hardware. I have bought smoked glass and hardware online but can't figure out where it all goes. If you have anything that would help me that would be awesome. Thank you much in advance Bob...bowtie-trifive

I will look up your e-mail address but in the future you will get better results by sending your request to my e-mail, thankfully tri-5 notifies me by e-mail when a post or PM concerns me.
Bob

[vet7ret]

before I can think of installing I need to know how to remove the window, Mine is stuck half way down and will not move

[BigDaddyRat]

before I can think of installing I need to know how to remove the window, Mine is stuck half way down and will not move

Vet, without seeing it, here's the procedure I think will help you...

1. Remove your window crank, door handle and inner door panel
2. You will note there are two access covers (unless someone didn't put them back on last time they were in there, which is sometimes the case...:rolleyes:
3. Romove both those access covers...
4. Then remove the screws that hold the window crank assembly to the inside of the door (there are 3 or 4 phillips head screws around the crank stem)
5. Once those are removed, you should be able to move the glass up where you can drop that crank assembly out the bottom access hole.
6. Then, while looking through the rear access hole, you'll note there is a window track that guides the window as it is rolled up and down, that also has a phillips screw holding the bottom of that assembly and remove that screw
7. Now you have to remove all the screws holding the window wing and window wing track.
8. Once you have the window wing track removed, you should be able to slide the side glass forward enough to pull it out of the top side of the door.
9. The rear glas also comes out the top by removning the track guide at the front of the glass.
10. This must also be accessed by removing the inner access panels

Hope this helps you think it through, I'm not far from you (Porter) so if you get in a pinch, let me know and I'll drop by some evening and help you with it. :shakehands:

Take care and :anim_25: with it!!!! BDR...:cool: