Wiring Diagram Part Duex

[56ChevyWagonman]

I would like to know if someone could point me in the right direction of a wiring diagram for a 56 210 four door wagon?

Also I am going to be gutting out the current interior this weekend.
I am planning on sanding down the floor pan to put in Hurculiner roll in bed liner. For Heat and sound suppression. Then I will be installing the wiring harness. I have the EZ Wiring 21 Circ. universal kit. After that kit is installed I will be installing Dynamatt or something similar to top it all off for a little more heat and sound suppression.

Is there anything I should be aware of before doing this?

Thanks,

[Old Buzzard]

"For Heat and sound suppression'. I highly doubt you'll get much, if any of these benefits from bed liner. That material is an abrasion reducer. The Dynamat is a good choice. There are several posts on that topic. Maybe a search?
As for the wiring: The wiring diagrams are in the shop manual.
Have fun!!

[557B210]

You can get a wiring diagram online at the site below or order one from Eckler's.

http://www.56classicchevy.com/56-chevrolet-wiring-diagram.html

http://www.classicchevy.com/product.asp?pf%5Fid=17%2D88&dept%5Fid=226

[56ChevyWagonman]

Thanks for the info guys. I Will be checking out the sites.

Thanks

[henrys57wagon]

Ken, I used that wiring kit for my 57 wagon. What are your upgrades, ie A/C etc. I have added an extra 6 fuse block for PW, PDL, airlift system, etc. You can PM me if you have other questions, good day, Henry.