Corvette fuel rail covers

[Chewie46]

I have a 95 LT1 out of a Firebird. Will Corvette fuel rail covers fit?

[Tuned55]

I have a 95 LT1 out of a Firebird. Will Corvette fuel rail covers fit?


I'd say yup if they are for a LT1 Vette. My son did that in his truck:cool:

[Rick_L]

The Corvette throttle body and cable linkage are different from the Camaro, so you have to cut a notch in the driver side cover so that everything clears. There is a clearance problem at the rear with the pressure regulator and fuel lines. I moved one of the fuel lines by modifying the clamp that pairs the two lines together. There's other solutions possible there too.

Also some of the vacuum lines need to be rerouted or changed to a different configuration (straight fitting vs. 90º, etc.)

Be sure to get the studs that hold the covers to the intake.

All in all, not too bad to make it work, but definitely not something you can snap on in 5 minutes.

[Tuned55]

Good info Rick. It's been more than 10 years since my son did his LT1 truck but I do, now, recall some of what you posted. It really helped the looks of the LT1:tu