jraweld
01-06-2007, 11:58 AM
Hi everyone,can anyone give me some advice in locating the side mounts for a small block,i have the original front mounts off the 265 so would it be better if i mounted the 350 with the front mounts and used that as a refernce to locate the side mounts?Also i've been told that you should put a level on the intake and it should read level and that there is 5 degrees plus or minus depending on the intake machined into the intake where the carb bolts up,does this sound correct?also if i have it up on jack stands i should make sure the frame rails are level is that correct?thanks in advance for any responses