Hood air dam.

[chevman57]

Does any one on here have a picture of the air dam mounted to the hood that is running the radiator in front of the support? The way i have it figured it will have to be notched if the radiator is mounted in front of the support.
Terry

[57 sedan delivery]

The thing to do is have the top hose outlet at the same position on the tank as the stock 6-cyl radiator did, that way you could use the existing factory notch in the dam.

[Blackie]

Hi Terry, I have a V8 type radiator in the 6 position, this is what the airdam looked like

http://pic50.picturetrail.com/VOL419/1418666/12106301/221610099.jpg

after some mods

http://pic50.picturetrail.com/VOL419/1418666/12106301/221610106.jpg

http://pic50.picturetrail.com/VOL419/1418666/12106301/221610124.jpg

[chevman57]

Thanks for the input guys. Blackie thanks for the pics. That is what i was figuring on trying.
Terry

[dseale4888]

Terry, my 55 has the radiator in the six position. I took pics this afternoon.
Dave

[chevman57]

Dave i am going to have to notch the air dam kinda like the notch showing on yours.
Terry

[MikeKy55]

Stock 6 banger baffle. I stole this from ebay, so it may go away in time.

http://i19.ebayimg.com/01/i/000/85/2c/665d_3.JPG

[chevman57]

Well i think this subject has changed again. I`ve about decided i really do not want my radiator in front of the support so i guess i`ll put it in the stock location and go back to the V-belt pulleys and the ole flex fan.
Terry