original power steering problems

[HEMI169]

Replaced manual steering with cylinder type power assist.When sitiing still
steering will jerk when turning.Turning a curve it fells like it has a catch in it.Valve and cylinder where supposed to have been rebuilt.Any help anybody??:confused: :confused: :mad: THANKS

[MikeKy55]

Most common problem causing that is A. loose belt B. bad pump or C air in the system. If it's the original pump, we can rule out the belt. Are you sure the air is all out of the system? Might be worth a try to jack the front up and with the engine running and cycle the wheel from stop to stop several times. If it's air, that should get the air out.

[HEMI169]

Thanks MIke pump off vehicle that was working fine.New belt not slipping.Left it jack stands and cycled 3 or four times.Might try again and again.Thanks for the help.:rolleyes: ;) ;)

[MikeKy55]

Roger that. Let us know how you progress.