Interlocking garage floor tiles

[warren57]

Does anyone have any thoughts or experience with interlocking garage floor tile, I would appreciate your thoughts.
Thanks
Warren

[chevman57]

Never had any experience with them myself. But the ford house has them in the parts dept. entry floor here and they are noisy as all get out when walking on it. That is the plastic ones.
Terry

[rayharris]

I have the foam rubber type around my work benches. They are a lot eaiser to work from. I think sam`s club have them. :gba:

[oceangoer]

BY accident I meet the Behr Paint Company Rep when I was at Home Depot looking for Garage Floor Paint.

The Rep recommended the -2- part for my garage. Per his recommendations, I'm going to wait until the Concrete Pad in front of the garage doors is completed and additional gravel on the Long driveway, which I was going to do anyway. The excessive amount small rocks can play havoc on the paint.

The -2- part epoxy was a very reasonable price and I'm extremely happy with the new interior and exterior paint applied to my home this last Summer.

Here is the Garage Floor Epoxy Link..

http://www.behr.com/dsm-ext/v/index.jsp?vgnextoid=2e39ea6621ca5110VgnVCM10000081 19fea9RCRD&vgnextfmt=default#channel=HEADER_NAV;view=13;vgnex toid=4e43f11390a59110VgnVCM1000006b0910acRCRD

Michael...

[mickeywestsr]

I never painted my floor because of slickness when wet. :flag6:
:gba:
bowtie-trifive

[oceangoer]

mickeywestsr,

RE the Wet and Slippery. I have a couple of friends with the Epoxy paint on their garage floor. My Big concern was Peeling - But for several years they have none.

And, I understand the Slippery, my second concern, as it Rains A "LOT" up here in Portland.

I checked out Bill's floor, he splashed a bucket across the floor. Well, no slip- Kind of Sticky Like. Might have been my Deck Shoes. Ron had on Tennis shoes and his wife did also. But, Leather shoes,, certain to be different and probably slippery, not that I would wear then up here in the Winter...

We put some soap on the Floor, turned it into an Ice Rink, FUN...

But, Just how long can the Epoxy last ?? And can it be re-surfaced, easily ??


Here is a good one for you. I was picking up some porcelain Tile for a room my new house, A Made in USA product, 95 cents a square foot. Hum, it struck me that this tile was about the same price as Garage Floor Epoxy. I'm thinking HOW can that be ??

So, I asked the Sales Rep, Can I install This Tile on my Garage Floor ?? Soon We had a few very puzzled Reps and a long discussion.

The decision, Maybe, Sort of, Need to Check the Factory,,,But, not a NO. Other than No Floor Jack and that sort of thing. It sure would be Cool for your Daily Driver. I'm still waiting. I doubt that the Factory would go along with this whacked out idea, But ,, Ya just never know....

[mickeywestsr]

Well Ocean, I've never thought of that. Floor would have to be perfectly level or tile would pop. :p3:
:gba:
bowtie-trifive

[oceangoer]

Actually, the Sales Rep's biggest issue was that the Motor had to fill all of the
Voids under each tile,, or Crack...

Yes, it's a new floor and very flat. Good Point.

Michael...

[56owner]

I worked at a machine shop where the owners were very concerned about looks. They spent big bucks having the shop floor blasted and epoxy coated. It got prety slick with oil. But the steel wheels on material carts absolutely ruined the floor. granted the carts were heavy and went across the floors 3 times per shift, So I guess you'd probably have to convert engine stand and crane to rubber or plastic wheels.

[oceangoer]

Gees, I'm surprised they lasted at all.

No, Paint would not work in my shop either. Shopwith , Carts, Engine Pullers, Welders, Oops, dropped that Hammer, Oops, oil or brake fluid. You are right there,,l doubt Epoxy would last a week around me in my shop...I'll probably just use a concrete sealer, it's a shop..

Driver Garage Floor, I'll probably go with Epoxy, But,that's most likely a few years away, too many other things first !

Thanks for that info.

[57 Bel Air LS7]

Does anyone have any thoughts or experience with interlocking garage floor tile, I would appreciate your thoughts.
Thanks
Warren

Warren, check out the flooring section of "Garage Journal.com"
(http://www.garagejournal.com/forum/forumdisplay.php?f=20)

Plenty if info about all types of garage flooring. :anim_25:

[oldfart]

BY accident I meet the Behr Paint Company Rep when I was at Home Depot looking for Garage Floor Paint.

The Rep recommended the -2- part for my garage. Per his recommendations, I'm going to wait until the Concrete Pad in front of the garage doors is completed and additional gravel on the Long driveway, which I was going to do anyway. The excessive amount small rocks can play havoc on the paint.

The -2- part epoxy was a very reasonable price and I'm extremely happy with the new interior and exterior paint applied to my home this last Summer.

Here is the Garage Floor Epoxy Link..

http://www.behr.com/dsm-ext/v/index.jsp?vgnextoid=2e39ea6621ca5110VgnVCM10000081 19fea9RCRD&vgnextfmt=default#channel=HEADER_NAV;view=13;vgnex toid=4e43f11390a59110VgnVCM1000006b0910acRCRD

Michael...

You hi-jacked this guys post to talk about floor paint??
He asked about interlocking floor tile ...Not paint.

[Mr. Jean]

Racedeck is what I've got, if we're still talking about lock together flooring.
I'm very happy with it too. You may want to check them out. They're a bit pricey, but great stuff. There are others out there too. :anim_25:

http://i3.photobucket.com/albums/y67/JEANS32/Garage%20stuff/Opt_Garage_0802.jpg

[oceangoer]

You hi-jacked this guys post to talk about floor paint??
He asked about interlocking floor tile ...Not paint.

Well I certainly didn't mean to are upset anyone. I guess I left out the interlocking tile part of my Search and Considerations. Which results in a very difficult decision to What System of Garage Floor Covering to use.

This will be a long post....

Cost is not only a Huge factor for garage floor coverings for me. But, repairs are very important to me. Floor will eventally get damaged. So, I am VERY concerned regards Epoxy Floor Repairs and Peeling - Not to forget longevity !!

I have looked "On-Line" at the Interlocking Garage Floor Tile Systems. I defiantly like to Look, Simple Installation, Ease of Repairs. The Link pasted below is Rubber Flooring Inc. MY concerns were, I have not spoke with a Local User - to Look at installed used rubber flooring - Get their feedback.

http://www.rubberflooringinc.com/garage/coin-pattern.html

A 25 year warranty WOW. But, again, Will this cover the things I'm concerned about, Gravel Damage, Torn interlocking joints ?? Another reason I wanted to speak with an actual customer. I fully realize that no company can provide a warranty to replace anything. I really want to know, just how good is this product.

I was recently reminded that a friend that owned an independent Auto Parts Store that used had Rubber interlocking mats behind the parts counter, for YEARS. He loved them, easier on the Feet !! They were practically indestructible. They needed to be removed monthly for a cleaning. But this was a Auto Parts Store with a sizable Machine Shop,, So, metal, oil, dirt, grime was prevalent. Most Street Rod Owners probably would not have any where close to the disaster zone as this shop in their Driver Garage.


I like this companies use of Rubber in the tiles better than a Polymer like Polyvinyl My experience with Rubber Floor Mat Products are very Positive.

Interlocking Tile can be placed over Sealed Concrete Floors. The Epoxy Paint Factory Rep's I spoke with said their Epoxy the not adhere as well to a sealed floor. Oops

Interlocking Tile can be placed over Sealed Concrete Floor or over a Painted Concrete Floor. Epoxy can as well, But, if the previous painted floor is peeling or,, well..... Re-painting is always to cover damage, My Very first and highest most Concern of the Epoxy Floor.

Interlocking Tile can be placed Quickly, no glue, no smell, and can be immediately used.

Interlocking Tile can be placed down in patterns. I like this and patterns tend to hide damage. And I like patterns too.

If I used the Rubber Floor product or any other interlocking Tile product. I would defiantly seal the concrete with Concrete sealer to seal moisture and the Dust that leaches out.

I've decided to buy samples from 3 selected interlocking tile companies and install a single row of each Manufacturers tile by my garage door, where most of the gravel ends up, Not a large expenditure..

If I could purchased a pint or so of Epoxy, I'd be tempted to try a strip of th

Interlocking Tile or Epoxy ??? I'm hoping the test will be positive.

[roger1]

http://i3.photobucket.com/albums/y67/JEANS32/Garage%20stuff/Opt_Garage_0802.jpgI hope that shop isn't always that clean and neat!

Nice floor!!!

[Mr. Jean]

:sign0020: Nope, there are toys/projects in there now. Only take pictures on clean/tidy days. I do like to keep a neat place though.:flag6:

[blackieharley]

Hi
I have used the racedeck for a long time. Everytime I move I pull it up and put in the new house garage. Have not taken the time to learn how to post photos but in my photos think ther is pic of floor. Had three car garage and did whole floor, this new house only did the one car side. Wears really well.
Clean up good from grease. Only thing if drop and leave gas on it will lift. Un snap put new tiles in. Make sure leave a gap against the wall, or install in the hottest weather you have. Sun gets on it will expand and bubble up where the hot sun (100 degree shines on it), take away the sun and it goes back to normal. Depending on how dirty I sprinkle little comet on a wet floor brush around with broom and hose out the door. Wipe with towel on the end of broom. Great to work on with out creeper. It does indent with small jack wheels but comes back to normal over time. Reason did not do the daily drive side this time, hot tires, driving in 100 degree weatherr if sits on say a white tile will stain it. Of course the wife does not feel good about letting the car sit outside and letting tires cool off hmmm so did not put in the daily driver side. Can change the design easy and lots of colors. I put our name in the entry of the garage, Well has to be easy LEE was pretty easy. Makes a noise when walking on it with high heels so the wife cannot sneak up on you!. Like someone mention little pricy but lasts for years and can move to place to place, others are out there for less although the ones I have seen are thinner and the locking tabs don't seem to fit as tight so the seems are not as tight as Race deck. My 2 cents worth.

[Mr. Jean]

Yup, I like the red/gray combo, as it's more forgiving of the tire markings.:)

[BigDaddyRat]

Warren, I agree with Mr. Jean and BlackieHarley's two cents worth. I ended up with a product called MotoMat, a free floating flooring, I’ve had it down for about 10 months and love it.

Yes, little expensive, but in the long run, I think it’ll pay out… an, like Blackie said, easy to clean, easy to repair and the wife won't sneak up on you...:sign0020: but hey, one of it’s best aspects is it's very forgiving on the feet, not like walking on solid concrete all day.

About $2.40 sqr foot, my son and I laid it in about 7 hours. Lucky my floor is new and level and the shop is perfectly square so not much prep work other than sweeping up... :tu

Best of luck whatever you decide ! Take care, BDR :cool:

http://www.trifive.com/forums/picture.php?albumid=639&pictureid=18973

http://www.trifive.com/forums/picture.php?albumid=639&pictureid=18974

http://www.trifive.com/forums/picture.php?albumid=2262&pictureid=19198

http://www.trifive.com/forums/picture.php?albumid=2262&pictureid=19200

[/QUOTE]

[blackieharley]

BDR wished I had your garage and car!!!!

[roger1]

BDR,

You and Mr. Jean both too tidy! :sign0020:

Very nice space and floor. Well done.

I went epoxy but I did strongly consider Racedeck.

[stovebolt56]

If you are going to use a sealer on a garage floor use a good uv commercial grade sealer 25 -30 % solids ( two coats ).By using a uv sealer it will not turn yellow as it ages.If you want to use a epoxy floor coating you have to remove any grease - oil - curing compound from the floor or in time it will start to lose its bond with the floor and come up.Using a floor sealer or epoxy if you want to make it slip safe, use clean dry sand ( 40/140 grade ) its a really fine grade.The best way to use the sand is to mix it in the sealer of your choice just before you are ready to pour out the sealer on the floor.Add about a quart of sand to every 5 gallons of sealer.At this rate of sand you will have a grip to the floor and it will still be comfortable to lay on.
:bowtieb:

[oceangoer]

I asked a long time friends to send a few pics of his Rods so I could print them and hang 'em in my new garage. This is what I received...

The pic of Ron's '57 was taken when his Daughter was about 14,, EASY Boys, I said Daughter.

The pic of the '67 Chevelle with Ron and his Daughter, was taken after her College Education..

So, this Epoxy painter floor is now nearly 10 years old, see 67 Chevelle in the Garage.

So far, no peeling, Chips, or Cracks in the Epoxy Paint. Look at the Reflection of the '67 in the garage floor..

The '57 is just Stunning. Near Perfect paint and original interior, except carpets. Hot 350 Muncie underneath...
I'm Amazed...

I suppose this is 10 points for Epoxy .............

Michael.

[shnomad]

Just noticed your post. I have the black and white heavy plastic tiles from costco. Came out awesome. I have no complaints and would do it again. Cost me about 700 for a 20x24 area. They have been in about 3 years and no problem.

[mickeywestsr]

I asked a long time friends to send a few pics of his Rods so I could print them and hang 'em in my new garage. This is what I received...

The pic of Ron's '57 was taken when his Daughter was about 14,, EASY Boys, I said Daughter.

The pic of the '67 Chevelle with Ron and his Daughter, was taken after her College Education..

So, this Epoxy painter floor is now nearly 10 years old, see 67 Chevelle in the Garage.

So far, no peeling, Chips, or Cracks in the Epoxy Paint. Look at the Reflection of the '67 in the garage floor..


Thats really nice but mine is a working garage....:tu
:gba:
bowtie-trifive
The '57 is just Stunning. Near Perfect paint and original interior, except carpets. Hot 350 Muncie underneath...
I'm Amazed...

I suppose this is 10 points for Epoxy .............

Michael.

[shnomad]

here is my floor and car
http://www.trifive.com/forums/picture.php?albumid=2595&pictureid=30167

[garys55chevy]

When I purchased my home, before moving in, I had the
-Two- part epoxy product installed, took two containers, I have a 3 car garage, price was reasonable and labor took 1 full day. I have lived here through 2 winters and floor still looks nice , I do keep my man cave clean... I placed two coats on to ensure it would last, per the rep at lowes... :tu

[1957chevy]

The inside of my house isn't as nice as those shops/garages! I'm jealous!

Is the interlocking stuff glued down or not?

[tngator]

Anybody have experience with the Car Guys epoxy ?

[shnomad]

It interlocks- My garage was built on the old driveway (to save $) so I had some uneven spots and lots of cracks to cover. It does discolor where the tires always sit but not a big deal to me. They are pretty heavy duty.

[C57heaven]

if you go with plastic interlocking be sure you can use a hydraulic jack on it without crushing the tile. Steel roller car dollies could cause a problem if left on there for awhile.
Be sure to ask a couple vendors to get the low down on their product.

[shnomad]

your absolutely right. I only use the jack in the driveway because of the lack of working space inside the garage and the jack WILL crush the plastic tiles unless you use a piece of plywood to help spread the weight.

[run-em]

I've a floor covered in square rubber interlocking ventilated tiles. Got them years ago from Home depot. You can put a jack on it, car support stands on it, water will run thru it, jacks will roll, it is easy on your body when you stand or lie on it. It does act somewhat as an insulator from the cold garage floor in the winter. If you've any interest in this type of floor, PM me and I can pull up a few tiles to see if there is any manufacturer info. Easily done--as you can unlock tiles & re-lock-- and you can even roll it up like a rug to really clean the floor when needed.

[PwrHse]

Hello ; New here . I installed vinyl floor tile on my garage floor 8.5 years ago . I work in there and drive on it . It holds up well . Once a year I strip and re-polish it and it is good to go . I used to park a heavy diesel truck on it , now just a wrangler , motorcycle . Since I did this others I know also followed and installed in their garages . Those tiles sell for about 59 cents a peice . Once I figure how to post a pic I will .

[G.R.]

My friend Andy installed red and black RaceDek in his garage/shop. It is a great floor covering, cleans up easily and if you ever move you can take it with you. Pricey though but well worth it. Over the years Andy spilled gas, brake fluid, oil, lacquer thinner, you name it, as well as welding slag and nothing bothered it other than when his son got to close to it with a torch. Once a year he'd move everything out and powerwash the floor. As has been mentioned floor jacks tend to dent it in a bit, but it soon pops back out....Andy took his floorjack and cleaned the wheels off real good then applied the 'soft' side of velcro to them and that seemed to eliminate a lot of the denting, he did the same with the roll-arounds he used under the tires to easily move a non-running car when he was building one and to the wheels on his small roll-around tool box and he used a pad of 1/2'' plywood under jackstands. It took Andy and his son about three days to install it in his 30x40 shop...the garage floor wasn't exactly square so it involved some custom trimming to fit right.

I finally convinced my wife to let me install it in the garage this year. Still haven't decided on a color combo, keep changing my mind:), yet but I'm going to wait until summer to order and install it.

[roger1]

A long time ago I did a garage with VCT tiles and it didn't hold up all that well.

I really like the Racedeck and darn near went that route but I decided on epoxy. I went with the Wolverine (http://www.alphagarage.com/) brand and with their epoxy primer, color and then urethane clear, it is 25 mils thick. That's about 5 times thicker than the UCoat-it system or the ones from the big box stores.

http://www.hotrodders.com/gallery/data/3435/LiquaTile1.jpg

http://www.hotrodders.com/gallery/data/3435/Wolverine_Floor_Final1.jpg

http://www.hotrodders.com/gallery/data/3435/Floor_Done_TV_up.jpg

http://www.hotrodders.com/gallery/data/3435/Wolverine_Floor_Final2.jpg

http://www.hotrodders.com/gallery/data/3537/Engine1.jpg

By the way, if you look at the website for Wolverine, they have a few pictures of my shop and my testimonial there.

[Pwash72022]

Has anyone ever thought about stained concrete. That's seems to be the new thing here in AR and it lOoks knda cool.

[G.R.]

Has anyone ever thought about stained concrete. That's seems to be the new thing here in AR and it lOoks knda cool.

My brother-in-law had that done in the garage when they built their new house a couple of years ago...so far it has held up very well. They hired a company that does a lot of commercial/auto dealer floors to do the garage floors...wasn't too bad, expense wise, for their oversize 3-car garage.