Classifieds section of Trifive , Buy,Sell, Wanted, Trade, Free Stuff. Cars & Car Parts OnlySpecial Note, when replying to or placing an ad, only post things relevant to the sale. The Classifieds Section is not a discussion nor a comment forum. New Parts for Sale by Members, are limited to no more than 10 Items per month on new parts. Used Parts for Sale By Members. The amount of used parts a member can sell per month is not limited , as long as the member does not try to make a Business out of selling used parts. This is where you can buy, sell, or Trade or give away parts / cars directly in the forum. . This is the important part, if you trade a part and have a problem with the part you got in return, you are not allowed to complain here. So if you got a bad deal that's between you and the guy you traded with, It will not be posted here. No Warnings ( Bad Part Bad Guy ) etc, will not be posted here. ---( Note Business's )---No selling in this area if you are a business's other than official Trifive Sponsor's.
New Addition to Rules, If in fact you feel that you have tried everything to settle a problem with another member, Do not contact us unless it is a last resort, You can now send a pm to Otis or Terry and we will try to help solve the problem. If a member is doing shady business we will deal with that member, so that others are not taken. Otis
CPP Delphi 600 steering box and pitman arm FS or Trade
New Delphi 600 power steering box. I purchased direct from CPP on Ebay. This was a closeout of a kit that they produced before the 500 box using a 600 box and adapter plate. After I bought it, I had some folks on the forum tell me that I would have trouble getting it to line up and they were right so now I am kicking myself for trying to save a few bucks. It is very close as you can see from the pictures, but it is misaligned by the thickness of the adapter plate, about 1/4". I am going to offer this up for sale or trade because the 600 box is a great box and maybe someone can make this work on their car. If you have a custom application and the column could be moved 1/4" or with a shorter column a u-joint could probably be used. My firewall and steering column and finished and painted so I would rather get what will bolt right up and be done with it.
i paid $350 for the box and pitman arm but I am open to offers just to recoup some of my loss or I would be interested in trading for other parts I need to finish the car (this would be the best deal).
Some of the things I need:
700R4 cross member
SBC flywheel and starter
I need most of the chrome on the car (but only show, or near show quality)
PM me with offers or questions
1956 Belair 2 door sedan
I am looking for any offers and kicking myself for not listening to the advice on here. Im told this is a great box and if I was building a custom project it would work no problem. They are $479 without the pitman arm so for someone that can use this they are going to get a great deal.
1956 Belair 2 door sedan
Thing is, when you shim, you need to not only get the box's shaft end to line up with the steering column's shaft end, you need to have them in line or the steering will bind at some point in its travel. A rag joint or a single u-joint will not tolerate any angularity.
If the adapter plate is too thick you can't get there from here. And you can only make it so thin because you need countersunk fasteners, or counterbored holes for them. And you can only go so thin on the gearbox too.