Stainless - Welcome to TriFive.com 1955 - 1956 - 1957 Chevy's Bel Air Tri5 210 150 Nomad Forum, Photo Gallery and Classifieds. Here you can Buy, Sell, or Trade. Get or Give Advice, or Just Talk Classic Cars.

trifive · 11-19-2009, 08:39 PM

I am trying to get the stainless I need for my 57.

I got the bumpers and the stainless on the top of the windshild already.

Please take alook at the rest of my stainless in the photo's below and tell me what pieces I need.

The 2 pieces marked with apiece of tape, seem to be missing a piece each do you know what the names of the 2 pieces are and what else I might need.

Thanks

otis

rusty57 · 11-19-2009, 09:17 PM

Looks as though you have a whole lot more than i got to start with.

chevman57 · 11-19-2009, 09:27 PM

Otis its hard to tell really what is there in a pic. What are you trying to figure out, the stainless for the whole car? Looks like you have 210 and Bel Air trim both in that mix.
Terry

100%Chevy · 11-19-2009, 09:42 PM

I agree,you have 210 and BelAir trim.
The 2 "bent "pieces above the hood rockets are 210 beltline trim.
The long piece with the tape is the top quarter trim(above the aluminum side insert).It gets the short curved piece above the 210 trim.
Mike.

trifive · 11-19-2009, 09:43 PM

Quote:

Looks as though you have a whole lot more than i got to start with.

I did not have any of this been collecting and scrimping for 3 1/2 years so far.

otis

100%Chevy · 11-19-2009, 09:51 PM

I don't see the corner pieces for the backglass.
Or any interior roof stainless.
Wish I could see better!
Mike.

trifive · 11-19-2009, 10:46 PM

Here is a larger picture

chevman57 · 11-19-2009, 10:58 PM

Quote:

Or any interior roof stainless.

Mike Otis` ride is a 57 2dr sedan and has no interior stainless trim.
Terry

Shua57 · 11-20-2009, 07:33 AM

Yep, Mike got it. The shorter of the 2 taped pieces is a Sedan beltline door stainless and the long one of the the 2 is the upper rear quarter piece that covers the top of the insert and connects to the curve down piece that connects to the long quarter bottom piece. If I remember correctly, you are using hardtop stainless on your 210. The 2 beltline curved pieces that are on the left side of the hood rockets are for a 210 beltline. I only see the passenger side fender stainless that goes from the bumper and around the grill to the hood bar.
I also don't know what the 2 short pieces by your sill plates are, look like back door beltline stainless on a 4 door?
All that shiney chrome hurts my eyeballs

Josh

Hafrod · 11-20-2009, 09:47 AM

What I see that your missing is the CAR!

11-19-2009, 08:39 PM	#1
trifive Administrator Join Date: Dec 2005 trifive's Garage Location: Kentucky Posts: 5,348 Member #1	Stainless I am trying to get the stainless I need for my 57. I got the bumpers and the stainless on the top of the windshild already. Please take alook at the rest of my stainless in the photo's below and tell me what pieces I need. The 2 pieces marked with apiece of tape, seem to be missing a piece each do you know what the names of the 2 pieces are and what else I might need. Thanks otis __________________

11-19-2009, 09:27 PM	#3
chevman57 Administrator Trifive Leaders Club Join Date: Feb 2006 chevman57's Garage Location: Graham,Texas Posts: 22,287 Member #264	Otis its hard to tell really what is there in a pic. What are you trying to figure out, the stainless for the whole car? Looks like you have 210 and Bel Air trim both in that mix. Terry __________________ http://www.cardomain.com/id/chevman57 Upholstery picture link of work by B & T Trim Shop http://www.bttrimshop.com http://www.trifive.com/forums/album.php?albumid=1177 1957 2dr sedan Bel Air, owned since 1978 1972 Chevelle Malibu, awaiting rebuild,owned since 1979

11-19-2009, 09:42 PM	#4
100%Chevy Senior Member 1 Gold Star Join Date: Feb 2007 100%Chevy's Garage Location: Helena,Mississippi.(southeast Ms.15 north of the beach). Posts: 1,308 Member #2153	I agree,you have 210 and BelAir trim. The 2 "bent "pieces above the hood rockets are 210 beltline trim. The long piece with the tape is the top quarter trim(above the aluminum side insert).It gets the short curved piece above the 210 trim. Mike. __________________ http://www.picturetrail.com/100chevy Last edited by 100%Chevy; 11-19-2009 at 09:45 PM..

11-19-2009, 09:51 PM	#6
100%Chevy Senior Member 1 Gold Star Join Date: Feb 2007 100%Chevy's Garage Location: Helena,Mississippi.(southeast Ms.15 north of the beach). Posts: 1,308 Member #2153	I don't see the corner pieces for the backglass. Or any interior roof stainless. Wish I could see better! Mike. __________________ http://www.picturetrail.com/100chevy

11-19-2009, 10:46 PM	#7
trifive Administrator Join Date: Dec 2005 trifive's Garage Location: Kentucky Posts: 5,348 Member #1	Here is a larger picture __________________

11-19-2009, 09:17 PM	#2
rusty57 Member Join Date: Jul 2008 rusty57's Garage Location: Fort Mill, SC Posts: 42 Member #5982	Looks as though you have a whole lot more than i got to start with.

11-20-2009, 07:33 AM	#9
Shua57 Senior Member 4 Gold Stars Alu`s Revenge Champion! Atomica Champion! Ballthrow Champion! Boomerang Mayhem Champion! Quix Champion! Castle Defender Champion! Shanghi 2 Champion! mahjong Champion! Join Date: Mar 2007 Shua57's Garage Location: Brodhead, Ky Posts: 4,755 Member #2394	Yep, Mike got it. The shorter of the 2 taped pieces is a Sedan beltline door stainless and the long one of the the 2 is the upper rear quarter piece that covers the top of the insert and connects to the curve down piece that connects to the long quarter bottom piece. If I remember correctly, you are using hardtop stainless on your 210. The 2 beltline curved pieces that are on the left side of the hood rockets are for a 210 beltline. I only see the passenger side fender stainless that goes from the bumper and around the grill to the hood bar. I also don't know what the 2 short pieces by your sill plates are, look like back door beltline stainless on a 4 door? All that shiney chrome hurts my eyeballs Josh __________________ They call me tater puddin.....or Josh DRIVE IT LIKE YOU STOLE IT!

11-20-2009, 09:47 AM	#10
Hafrod Senior Member 1 Gold Star Join Date: Oct 2006 Hafrod's Garage Location: Claremore, OKLA. Posts: 1,644 Member #1291	What I see that your missing is the CAR!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode