Project Update Section, Post your Project updates hereThis section is for Project Updates only, So post any updates of your trifive projects. >Do not post tech
questions in this area of the forum = Remember only projects updates should be posted here.
Just buttoning up the Nomad's L79 327, should have it ready to put back in this weekend. Started out as a quick valve spring replacement, but evolved into a full blown engine, trans, posi rear, brakes and suspension overhaul.
Great buildup,looks great too. The only thing i see where there might be a clearance problem would be the water pump lower rad. hose might rub against the fuel pump outlet line to the carb. I hope you run across that but on my 350 with the same type fuel and water pump i ended up removing the f.p. outlet fitting and going with an AN-6 and braided hose to finally gain clearance. Good luck on the install.