Anyone know where I could get a drivers side bellhousing frame mount? Someone cut it off when they replaced the powerglide and went with a trans crossmember. Iím putting in a 4 speed and want to go back with the original mounts since the motor mounts are still up front and I donít feel like pulling the motor to put in side mounts.
One thing you should be aware of is that there are 2 different ones used. If the frame is a 2 pc welded frame it will use one type. If you have a "seamless" of often called a "California" frame they take a different mount.
Determine what frame you have and then get the frame mount that fits your frame.
I have both types.
__________________ 39 Years of Professional Restoration of anything on a 55-57 Chevy
Michael Domoracki (Mikey)
The Stainless Shoppe Restorations
N8143 State HWY 55
Seymour WI 54165
Email: [email protected]
920 833 0290 Sunday -Friday 8AM till Sundown. Closed Sabbath until Sundown Saturday night