Welder advice, Hand tool Advice Shop Tool.This is a section to ask for help/advice on all your tool questions. What welders work best and what shop tools work best, How to use a welder, and any other tools.
Remember if you have tools for sale they should be put in the classifieds.
Sounds like an excellent suggestion for my next Christmas present John.
I was too cheap to buy a set for years and just burned up bit after bit on stainless. I worked on a buddy's car for him and he bought me a set as a gift because I would let him pay me for the work. It was not long before every single HSS bit in my shop went away!
I bought a drill doctor shortly after, and I am never without a sharp drill bit now.
Don't know how I survived all these years without either one.
What I'm curious about Pops, is how you held them washers down in order to run a bit through them..? From my own past experience I know it couldn't have been that easy.
To tell you the truth Dano, it wasn't all that bad....I admit I do have limited equipment and abilities (sometimes).....However, my bench "vise" (Rick ) did a pretty good job in this case...Its just about the perfect size for such things.