Chevy Tri Five Forum banner

*Headers for a small block

4K views 11 replies 10 participants last post by  Reid Althage 
#1 ·
I have been reading and reading and I am still looking....

Do they make a full length header that does not hang below the frame that does not cost 4-500 dollars ?
I see that Williams makes a pair and that patriot makes some 3/4 headers however I am looking to see if there is anything out there that will work on a 55 that has been lowered 2 inches in the front and back....


right now im looking at the hooker headers 2458HKR

Any part numbers and help or what you can refer me to is greatly appreciated
Thank You all
 
#5 ·
I'm running Patriot 3/4s. Was previously running full length Hedmans but they hung far too low and I have now lowered the front about 3 1/2". Have heard that quality control is not the best with Patriots and some fit OK and some don't. I got lucky with mine and they fit OK. Had to make a slight squeeze on number 5 for clearance but otherwise OK.
 
#6 ·
I have Williams Classic Chassis Works headers. Full length with 1 3/4 primaries. Very nice headers but are well over your cost figures.

Doug's Headers makes a set just like them but they are expensive as well.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top