O'Reilleys nor AutoZone has anything that looks like it will work.
I already drilled a countersink into the head of the old bolt to keep the puller centered. i am replacing the original crank bolt with an ARP bolt.
I thought the 3 jaw I had would work but the hooks are too thick to go in there.
I think I will just buy a cheap one and grind it down.
How tight does that gear fit the shaft? Is it usually a bear to get off or is it just a matter of getting something that will fit in there to get hold of it?
Just buy a 3 or 2 jaw cheap unit and remove material till it will fit behind gear. It won't take much force to get it off. Just radius material removed on puller arms and don't remove to much if you can.
__________________ Four Seasons Metalworks
-CnC Metal art
-Custom metal parts
-Powder Coating Services