I think Jeff Foxworthy has family and friends on this site.
Could be & they will help you anytime you need assistance I will & my neighbors will.
Mike I like you creek bed mower, good idea.
Since we are showing pix of home-made equipment:
My zero turn as an offset trail mower tagged on the tractor mower = 9' cut.
Cannot tow the zero turn when the hydro drive is bypassed so I built a gauge wheel frame & remove the zero turn drive wheels it takes 10 minutes to set it up for use on the tractor. Pic of the first design it worked as planned however the cheap HF wheels lost the bearings the second time I used it, changed to no flat wheels from Northern Tool & added diagonal braces to the frame. I built it in '12 & have used it darn near every week during mowing season ever since.
jpg.gif 8-31-12 006.JPG (331.9 KB)8-31-12 006.JPG