Here's the old rusty piece next to the new piece I made already tacked into place. This is on the inside of the body where the floor meets the side of

I sprayed the rest of the bare metal with weld through primer to get ready for the new floor.

Here I've welded up some of the holes on the firewall.

Frame with the engine and trans in mock up form.

Here's the old rusty piece next to the new piece I made already tacked into place. This is on the inside of the body where the floor meets the side of

This is my frame after it came back from the sand blaster. Nice an clean!

This is a new piece for the B piller. It's for a hard top so i'll have to modify it to make it work.

This is the new floor.

Here's the old rusty piece next to the new piece I made already tacked into place. This is on the inside of the body where the floor meets the side of

chevender
May 23, 2009

Watch Add bookmark

There are no comments to display.