Chevy Tri Five Forum banner
Cancel
I sprayed the rest of the bare metal with weld through primer to get ready for the new floor.
Here's the new floor in place in the body and ready to be put back on the frame for final fitting and welding.
Here i'm jacking the new floor into the body with 2 floor jacks.
Here's the new one piece floor with all the edges ground down and coated with weld through primer.
I sprayed the rest of the bare metal with weld through primer to get ready for the new floor.
Here I've welded up some of the holes on the firewall.
Frame with the engine and trans in mock up form.
Here's the old rusty piece next to the new piece I made already tacked into place. This is on the inside of the body where the floor meets the side of
chevender

I sprayed the rest of the bare metal with weld through primer to get ready for the new floor.

Report
Watch Add bookmark
There are no comments to display.

Media information

Album
57 history
Added by
chevender
Date added
View count
145
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top