Chevy Tri Five Forum banner
assembly
1-7 of 7 Results
  1. Stock Chevy Discussion 55-56-57
    Hi all, I just rebuilt the steering column in my 55 bel air, and for some reason the steering wheel stops about 2 inches short of the blinker collar. Any ideas what I'm doing wrong? Thanks, Ryan
  2. Classifieds Section - For Sale Items ONLY!
    1955-1956 Chevy Bel Air Deluxe Heater Core Box Assembly This 1955-1956 Chevrolet deluxe heater core box assembly is a used original GM part. The part may have minor pitting and the flapper has been checked for functionality. The part has been media blasted and given a coat of black primer. The...
  3. Suspension Questions Chassis, Brakes, Shocks, Etc
    After fighting for a week to remove the bad wheel studs and since is has a clicking/rubbing when its turning I have decided to remove the Hub Assembly. Then get new bearings and "push" out the lugs/bolts. If that doesn't work then I will just get new Hubs. so here are my questions? 1.How to...
  4. Classifieds Section - For Sale Items ONLY!
    1955 Chevrolet Manual Pedal Assembly sold First I will take it Money order or PayPal Lower 48 only
  5. Classifieds Section - For Sale Items ONLY!
    These original 1955-1956-1957 Chevy Sedan vent window assemblies have been fully restored. Are your vent assemblies leaking or the glass bubbling along the edges? Leave it to us to get that fixed. With our trained professionals, we strip the old assemblies and rebuild them using all new rubbers...
  6. Suspension Questions Chassis, Brakes, Shocks, Etc
    Let me start off by saying i am new to Tri-Fives...I understand that 55-56 brake pedal assembly's are different from 57's, but how different??? Will 57' brake pedal assembly's fit a 55-56? Or vise-a-versa??? Any info you guys could send my way would be a great help!!!! :flag6:
  7. Stock Chevy Discussion 55-56-57
    Hey all, I have a 56 2dr HT. I have replaced the vent window glass, frame, seals, and the fur channel. I have the assembly back together but I cannot get the **** thing back in the door. It goes in fine if I take the fur/window channel's spacer bolt (that holds the bottom of the window...
1-7 of 7 Results
Top