Chevy Tri Five Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. Non Trifive Vehicles
    Starting to see the light on trailer brakes for Old 67 C20. Going conventional Era correct brake system.
  2. Super Stock/Pro Street & Modified Disc. 55-56-57
    I am wondering where people are setting there BBC 454 with the blower. Are we able to run the 3/4” forward and still clear the cowl and wiper motor or do you need to move further forward? I do not want to remove the wiper motor and recess the firewall if I can help it. Not worried about the...
  3. Member Classifieds
    I am changing my combo a bit and looking to sell my BBC headers and exhaust system. The headers were on the car when I got it and the drivers side been modified by the prior owner to fit the factory manual steering box. The headers are Headman Headers part #69111 and cost $250.00 new. The...
  4. Cooling Systems, Radiators, Fans / A/C
    I am looking for suggestions for a lower hose on a Be Cool Tri Five Extreme module. I found some possibilities by searching but they are all about a SBC. I am here with a BBC. I called Be Cool and they were not too good with any information. They suggested the bent coat hanger and auto parts...
  5. Cooling Systems, Radiators, Fans / A/C
    Greetings All. Has anyone ever tried to open up the fender wells to improve air flow through the engine compartment? I have what most consider an optimum cooling set up but it overheats when sitting still (230 degrees + in hot weather). I am told that my engine set-up limits airflow through...
  6. New Member Introductions
    Hi everybody, my first visit here on trifive. I just realize the value to get connected with people that have been doing this for a long time. I live overseas in Sweden, and my Project is a 57 sportsedan 4d ht. . my car came from Arizona 1986 with the Engine in the trunk ,, pretty much rustfree...
  7. Member Classifieds
    '79 Camaro front clip and rear end 79' Camaro Power brakes and steering Optima Red Top Battery Vintage air ac (alternator moved to driver side and compressor mounted on passenger side) '66 Stamped Chevelle 396bbc (Fresh rebuild just finished break in) (Was told it was actually out of a 70...
  8. Member Classifieds
    LOOKING TO SELL MY CUSTOM 55 WAGON, FULL CUSTOM FROM 502 BBC, TO 3D FLAMES..5 YEAR OLD RESTORATION, 15K MILES ON RESTO..BBC 502, FULL BUILT 700 R4, 2500 STALL, FORD 9" REAR, CUSTOM HEADERS TO H PIPE TO EXHAUST OUT OF QUARTER PANELS. FRONT POWER WINDOWS WITH CUSTOM POWER 3 FT SUNROOF. BE COOL...
  9. New Member Introductions
    Hey guys, it's Wayne from Kwik Performance. We've had a lot of customers encourage us to be a part of this community so we're excited to now be an active member and sponsor here at TriFive. We also want to provide any knowledge we have about LS and Big Block Chevy serpentine systems...
  10. Member Classifieds
    Here is a good set of Hooker Headers I took off my '55 Chevy. The only reason I took them off is because I changed the complete exhaust. There are no leaks, and no holes in them. They are "under the car" headers for a Big-Block. They fit a 396, 402, 427 or 454 They have 1 7/8 in. tubes...
  11. Super Stock/Pro Street & Modified Disc. 55-56-57
    I'm looking at going with a F1R or a F2 procharger in my 56 chevy and have some questions.. Does anyone here know of a member with this setup on their car? Mostly I want to know what I need in order to fit a power steering pump and the alternator as well as the procharger. Any info would be...
  12. Member Classifieds
    I have a pro form 35 gpm bbc pump and a 55 gpm meizere pump for a bbc. Both of these pumps have less than 30 minutes use, I bought them brand new from summit and could not find a way to use my pulleys without going with a expensive serpentine setup so I decided to go back to a mechanical...
  13. Trifive Steering/Power & Manual/Rack & Pinion- 605
    Has anyone here successfuly installed the flaming river manual R&P kit with a BBC? FR306KT if so please post up, I am looking to convert to a manual R&P setup and this seems to be a pretty nice kit since it comes with the column, hardware, and everything necessary. Flaming river is not the...
  14. Super Stock/Pro Street & Modified Disc. 55-56-57
    I have a 57 Bel Air 2 door post that I am building a BB for and I have a turbo 400 behind it I also have a brand new 4:56 posi unit for the stock rearend, my question is I'm considering tubs I have 31X18.5X15LT MT's on centerline racing wheels. I will use the stock rearend but can I buy axles...
1-14 of 15 Results
Top