Chevy Tri Five Forum banner
bell housing
1-3 of 3 Results
  1. Transmission and DriveLine Questions
    I'm going to be replacing the clutch assembly on my 56 belair with a wilwood hydraulic master cylinder that will mount on top of the pedal frame http://www.ebay.com/itm/130843235485?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT and use a mcleod hydraulic release bearing for my...
  2. Trifive Trucks Suburbans & Panel vans
    Hi, I'm starting to plan the restoration of my 1956 3100 series pick up. Originally it had a straight six but I'd like to swap this out for a 265, as I have always wanted a stock V8 pick up. I have managed to find and buy a 1956 265 engine however it came off an automatic and has no bell...
  3. Transmission and DriveLine Questions
    I'm considering a swap to a Tremec or some other 5-speed tranny to replace my old Saginaw 4-speed in my 57. Rear gears are stock '57 3.55s. I figure that the Tremec 2.87:1 1st gear would be best with the 3:55s. I'm considering a TKO500 or 600 with around .68 or .64 5th gear which would yield a...
1-3 of 3 Results
Top