Chevy Tri Five Forum banner
big block
1-8 of 8 Results
  1. Cooling Systems, Radiators, Fans / A/C
    I am looking for suggestions for a lower hose on a Be Cool Tri Five Extreme module. I found some possibilities by searching but they are all about a SBC. I am here with a BBC. I called Be Cool and they were not too good with any information. They suggested the bent coat hanger and auto parts...
  2. Classifieds Section - For Sale Items ONLY!
    I bought this engine to use in my '55 Two-Ten build, but I have decided to go a different direction. When I bought it I was told that it was a "fresh rebuild", but we all know that means different things to different people. So I pulled the heads and pan to see what I had. Here is what I...
  3. Headers and Exhaust System
    I will start with I have searched through the forum, but was not able to find the specific information needed. I have a 1956 Chevy 210 4dr with a 396 big block with oval port heads. The current headers on the the vehicle are only 4.5 inches off the ground on the passenger side and about 6...
  4. Classifieds Section - For Sale Items ONLY!
    Here is a good set of Hooker Headers I took off my '55 Chevy. The only reason I took them off is because I changed the complete exhaust. There are no leaks, and no holes in them. They are "under the car" headers for a Big-Block. They fit a 396, 402, 427 or 454 They have 1 7/8 in. tubes...
  5. Engine Building, Hi Performance
    Hi Everybody I am having problems i am on my forth distributor cap in a year. first off i am running a Mallory Unilte distributor and a Mallory promaster coil and a Mallory 6al capasitive discharge box. I have tryed running it with the ballast resistor and with out it. no diffence. im also...
  6. Big Block Install Questions and Answers
    Hi everybody im looking for a manual rack and pinion setup for my 55 210 2 door wagon 490 cid big block. I already have the ididit column and the stock manual box. I'm trying to get the clearance of the headers on the steering. i have had heddman hustler in frame headers and I had to beat the...
  7. Big Block Install Questions and Answers
    Is ther anyone out there that has built a Big block 55 with a 6spd that has big tube headers And tilt coloum and rack and pinion? Im new to TriFives and would LOVE some HELP!!! Thank you very much!!!
  8. Transmission and DriveLine Questions
    I have a clutch in my big block 57. The guy who installed it was an idiot and welded in some mount that wont allow the assembly fall out. luckily im taking the engine out anyway. Are there any kits I can use to switch to hydraulic clutch from "manual" clutch? I have pics of what he did, and...
1-8 of 8 Results
Top