Chevy Tri Five Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Super Stock/Pro Street & Modified Disc. 55-56-57
    Put in a new Master cylinder, all new lines, new front discs. Bench bled the Master Cylinder. Bled brake lines..... No pedal pressure. Pushrod from power assist travels about an inch . What could cause no pedal pressure?
  2. Classifieds Section - For Sale Items ONLY!
    Hello, Up for sale is a set of (4) Chevy OE Style Steel Wheels used for disc brake conversions (part num 57-10473 or 57-335855-1). These are the 15x6 size with 3-5/8 offset. They allow for disc brakes with original style hubcaps. The wheels are all essentially brand new. Only one wheel...
  3. Trifive Trucks Suburbans & Panel vans
    My 56' Cameo has LED brake lights to which the turn sig and running lights connect as well as the brake lights. all systems work well.... except when running lights are on no brake lights. when they are off brake lights work fine. I believe they are taking full voltage during running light...
  4. Suspension Questions Chassis, Brakes, Shocks, Etc
    First of all, great forum! I have done several searches that have helped me with my 57’s alternator conversion, halogen headlamp conversion, disc brake conversion and my soon to happen 700R4 conversion. This is my first time posting and I thought I would see if I could tap into everyone’s...
  5. Classifieds Section - For Sale Items ONLY!
    This 1955-1957 Power Brake Treadle Vac Master Cylinder Unit has been fully restored. We disassemble the entire the unit and restore or replace any of the interior pieces, plus we use new gaskets and rubbers for a perfect seal. The units have also been stripped and painted to give it the...
  6. Suspension Questions Chassis, Brakes, Shocks, Etc
    I'm sure I've seen someone with a trifive (I think it was turquoise), who had a floor e-brake installed in the floor to the left of the drivers seat. I'm considering this location/solution - looking for who's done this and any feedback vs. locating in center near manual shifter.
  7. Suspension Questions Chassis, Brakes, Shocks, Etc
    Hello, I am new on the forum, and writing to all the members from France. I have since 25 years a 55 4dr Sedan Bel Air, 6 cyl, 3 speeds mecanic gear box, all original. I am starting again my bel Bel Air after 7 years in my garage with no use at all... I have a break problem and maybe someone...
  8. Suspension Questions Chassis, Brakes, Shocks, Etc
    Hi, I am very new to this whole online society of forums so bear with me. Has anyone used C6 Z06 or CTS-V rotors and Calipers on a tri-five drop spindle front suspension? I have seen C6 Z06 brakes on a super big budget custom and I know that Hot Rod Jim is offering an entire Chassis with the...
1-8 of 8 Results