Chevy Tri Five Forum banner
clutch
1-3 of 3 Results
  1. LS & LT Installation Questions and Answers
    Hi all, been a while since I posted on the site. The trifive nationals were great, can't wait till this year. I finally finished the body on my 57ht and am ready to sit it back on the frame. I installed a LS1 and a tremec 6 speed out of a 2000 camaro. I have the complete donor car. The engine is...
  2. Transmission and DriveLine Questions
    I order a few clutch fork boot and none of the fit. Finally pulled out the tape measure and sure enough the new boot is about an inch too short. My old boot is almost 5 and a half inches long and the new one is 4 and 3/8. Any input? It's on a 56 210 with the straight 6 if that makes a...
  3. Transmission and DriveLine Questions
    I'm going to be replacing the clutch assembly on my 56 belair with a wilwood hydraulic master cylinder that will mount on top of the pedal frame http://www.ebay.com/itm/130843235485?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT and use a mcleod hydraulic release bearing for my...
1-3 of 3 Results
Top