Chevy Tri Five Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Stock Chevy Discussion 55-56-57
    57 Chevy BelAir Does anyone have the torque values for the rear end assembly. I found all the tech numbers for the gear mesh setup and bearing preload but nothing for third member bolts, axle bearing retainers or brake anchor pin nut. I haven't looked for the front spindle hardware values yet...
  2. Suspension Questions Chassis, Brakes, Shocks, Etc
    Hello TriFive Community! My first post, please be gentle. . . I am doing a frame-off restoration and am wondering (at the moment) about if I need to replace the front coil springs. I am using the stock front end and my springs cleaned up nicely, but was told that I should replace them just...
  3. Suspension Questions Chassis, Brakes, Shocks, Etc
    I am tyring to install new coil springs on all original 57 fresh front end. I have tried inside and outside compressors, with no luck. The problem seems to be the angle of the spring ( around 30*) comparied to the lower control arm (around 0*) I am installing the front end on the frame...
  4. Suspension Questions Chassis, Brakes, Shocks, Etc
    Am interested in any and all comments, photos, advice on lowering a '57 convertible. I've read through a bunch of the posts on lowering in general, but I'm concerned that the added weight of the convert might pose an issue with the final result. I was heading toward Classic Chevy 2" lowering...
1-4 of 4 Results
Top