Chevy Tri Five Forum banner
control arm
1-5 of 5 Results
  1. Suspension Questions Chassis, Brakes, Shocks, Etc
    Global West Upper Control Arms -- Interference w/ Inner Fender (Pics Added) Y'all, I'm installing a pair of Global West CTA-57A upper control arms on my '57 and it's evident the front tubes (and possibly the rear) are going to interfere with the inner fenders when under compression. This post...
  2. Suspension Questions Chassis, Brakes, Shocks, Etc
    Hey, I wanted to see if anyone has had this issue...I just installed one side of my 57's front suspension. The CPP upper tubular control arm bump stop is not long enough and the arm is hitting the frame. I added three washers to each side and one of the ball joint nuts is still hitting the...
  3. Suspension Questions Chassis, Brakes, Shocks, Etc
    I recently purchased new upper rubber bumpers for the upper control arms on my 57. I wanted to install them and found that I couldn't because the support for them was missing!:eek: I couldn't believe it myself! Why would anyone want to remove them (both sides!) Anyways I got a pair of the...
  4. New Member Introductions
    What a fantastic site! I wanted to introduce myself, my name is Mike and I am in sales and tech at Heidts Hot Rod Shop. I hope I can be of some technical assistance for any suspension question you guys might have. I have probably talked with several of you already and will be browsing from time...
  5. Suspension Questions Chassis, Brakes, Shocks, Etc
    All, I need some photos or help. I have rebuilt the front end with the tubular lower and upper a arms (57 2dr hardtop) and I went to install my swaybar and realized that the "L" bracket that normally is used to install the ends of the sway bar to the arms wont work on the tubular arms. Anyone...
1-5 of 5 Results
Top