Chevy Tri Five Forum banner
emergency brake
1-4 of 4 Results
  1. Stock Chevy Discussion 55-56-57
    I cleaned up the Park brake parts for my '57 Nomad today and found that the 'cheap pulleys' used in the two forward cable brackets are very worn. If there were bearings involved, they are 'gone', and the pulleys themselves have cut into the shoulder bolts which retain them. I've searched...
  2. Suspension Questions Chassis, Brakes, Shocks, Etc
    I hope someone can give me some good ideas on how to proceed: I've got a 1955 150 2dr sedan with 4-wheel disc brakes. The parking brake linkage isn't hooked up, but I want to get it working. I think the new exhaust system was in the way, so they didn't bother. The cable from the handle is new...
  3. Stock Chevy Discussion 55-56-57
    Hi fellows, Got all the parts in to fix the emergency brake and go to do it and someone cut away the frame support where the the floor brackets mount to. Any ideas where I could get this section or how I could solve the problem? Its gone about where I have the lines drawn on the photo below...
  4. Stock Chevy Discussion 55-56-57
    Evidently the emergency brake hasn't been used in years before I got the car six months ago. Looking at it appears I am missing a lot. My front cable goes right into the equalizer of the rear cables going to the brakes. Looking at a drawing, I don't have any of these parts I have circled...
1-4 of 4 Results
Top