Chevy Tri Five Forum banner
glass
1-20 of 20 Results
  1. Classifieds Section - For Sale Items ONLY!
    Good OEM 55, 56 Windshield trim and rear window trim. No corner pieces. No dings Need polishing. $200 firm for all 6 pieces, must take all, shipping extra. located in Edgewater, FL.
  2. Stock Chevy Discussion 55-56-57
    2 door 55 sedan Please help I took my rear quarter windows out in 2008 and am just now getting the car back together putting the windows in. I got the front door windows figured out, but I am missing the felts for the back windows and know there was hardware (that i must have thrown away)...
  3. Classifieds Section - For Sale Items ONLY!
    1955-1957 Chevy 2-Door Sedan Quarter Window Regulator, – Rebuilt These original 1955-1956-1957 Chevrolet Sedan quarter window regulators have been fully restored. We replace any gears or nylon rollers that are broken or worn down. Often the springs are broken or the main rivet is loose causing...
  4. Classifieds Section - For Sale Items ONLY!
    1955-1957 Chevy 2-Door Sedan Door Window Regulator – Rebuilt These original 1955-1956-1957 Chevrolet Sedan door window regulators have been fully restored. The vent window regulators also fit a 1955-1956-1957 Buick, Pontiac & Oldsmobile. We replace any gears or nylon rollers that are broken or...
  5. Classifieds Section - For Sale Items ONLY!
    Hello Up for sale is a 8 piece set of side glass for a 55 4-dr sedan. This is the original green tint style. All new glass still in shrink wrap, except for the one vent window used in the photo that is attached. In the Houston area and can deal locally. Can ship these, but will be at cost...
  6. Stock Chevy Discussion 55-56-57
    Does anyone have a manual or a video of how to install door glass and side glass in my 55 sport coupe. All I have in the car now is the window regulators. Need instructions on how to install everything else to include, stops, buffers and channel brackets along with the glass. Any help would...
  7. Stock Chevy Discussion 55-56-57
    I'm sure this is somewhere but I cant find it under any key words pertaining to "Rear door window installation 57 chevy 4 dr sedan. I'm installing Power Windows in a 57 4 dr sedan I'm building. I got the windows out a little over a year ago and now I can't figure out to get the new ones in. I...
  8. Trifive Nomads, Sedan Deliveries & Station Wagons
    I am working on a 57 nomad restoration project. I have a question regarding the sliding glass window on the nomad. My question is that when installing the sliding glass, what does the slider set on? Is there a channel or does it just sit in the window fur channel between the exterior chrome trim...
  9. Stock Chevy Discussion 55-56-57
    Hey guys, I know I am not the only one who is replacing all the flat glass in my redo...so I ordered the Door and Quarter glass channels along with the setting rubber kit. Ordered from Eckler's... Got everything and when I compared my quarter glass corroded frames to the new frames...the new...
  10. Classifieds Section - For Sale Items ONLY!
    1955 1956 1957 Sedan Rear windshield Stainless complete Good Driver condition SOLD First I will take it. Money order or PayPal Lower 48 only
  11. Stock Chevy Discussion 55-56-57
    I just got the new side glass for my '56 2dr sedan from Auto City Classic. Does anybody have any pictures of how everything(track, regulators) should be on the quarter glass when it is installed? I gutted this thing about 8 years ago and now I can't recall how it all goes together. I have...
  12. Interiors Questions and Answers
    Hi, I'm trying to figure out how to install new felt window channels in my '56 Chevy 210 wagon. Can anyone tell me if there's a way to attach the original clips to the channels, or is it bettor to just screw the channels to the door frame, or any other suggestions? Thank you much. --Jim
  13. Classifieds Section - For Sale Items ONLY!
    *all parts new mostly from danchuck unless noted as used you pay shipping. Email me at [email protected] with questions or offers. These parts belonged to my father and when he passed I took responsibility of them. With a pending move coming up, I figured I should sell rather than move...
  14. Stock Chevy Discussion 55-56-57
    I'm afraid i installed my rear window glass incorrectly as they tip forward when I'm rolling them down and the back corner of the glass sticks out when the window is rolled down all the way. Is this the way it is supposed to be or did i mess something up and need to tweak something? thanks!!
  15. Chit Chat Area, Anything on your mind goes here.
    I am looking for all new Glass "Smoked" for the rear and the sides and tinted for front. I need it delivered to NJ looking for the best deal can anyone direct me in the best choices ? I am new here and still figuring out ho wthis site works. So far seams like everyone is Awesome and helpful with...
  16. New Member Introductions
    Hey guys this is my first trifive I’m building, its a 1956 Chevy belair post car so my question is what parts from a 56 four door will fit on my car? Thanks Mike
  17. Paint & Bodywork Questions and Answers
    I bought a couple of quarter windowsfrom restoration world $75 each complete for my 57 2 dr sedan .....after I received them, i grabbed my trusty digital caliper and compared them to the originals :( factory, dial in @ .250-. 260 ...and the new ones are .197 at best? doesn't sound like a...
  18. Interiors Questions and Answers
    Does anyone know of a shop in northern Illinois (Chicagoland) that knows what they are doing with 55-57 chevy's.
  19. Stock Chevy Discussion 55-56-57
    I have a 1955 2Dr Sedan and need to replace a crushed roof. I need Dimensions of rough opening from edge of top spot weld seam to Bottom spot weld seam in both front and back openings. This will give me a factory opening size to work with so new glass will fit....Can anyone help...
  20. Stock Chevy Discussion 55-56-57
    Does anyone have templates that they can share for 2 dr. hardtop side glass? I want to have made local, and since glass is flat should be no problem. I do not have any of my side glass to use for pattern. Ideally, someone has them in Autocad but I know I am probably reaching on that one.
1-20 of 20 Results
Top