Chevy Tri Five Forum banner
leak
1-5 of 5 Results
  1. Cooling Systems, Radiators, Fans / A/C
    The very bottom of my radiator has a circular indentation, which is dripping pretty bad. Is there supposed to be a plug or something? Its in the very center of the bottom of my factory original radiator
  2. Trifive Steering/Power & Manual/Rack & Pinion- 605
    I finally completed the Power Steering conversion on my 57. After starting the car and bleeding the system I noticed a leak at the high pressure line between the fitting and the hard line. I have attached some pictures of the leak. I found a couple of posting on this issue and will be loosing...
  3. Trifive Trucks Suburbans & Panel vans
    I took my 57 truck out on a cruise yesterday and I noticed that when I got to my destination there was some coolant leaking under the cab and from under the passenger side dash inside the cab. The temp looked ok and the engine wasn't smoking or anything. Woukd this just be the heater core even...
  4. Suspension Questions Chassis, Brakes, Shocks, Etc
    Installing new SS brake lines on a disk brake conversion. Developed leaking at MC and proportioning valve locations. I had to seal the unused MC port pipe plugs as they leaked during MC bleeding. When asking tech help from my line supplier, I was told that SS lines being much harder require...
  5. Stock Chevy Discussion 55-56-57
    The shaft from my '57 PS Generator is pitted and because of this I leak PS fluid between the generator and the PS pump. I got a rebuilt PS Generator from Ecklers yesterday (the last one they had) and while it solved my leak, it won't charge (even after polarizing). Ecklers said they "might"...
1-5 of 5 Results
Top