Chevy Tri Five Forum banner
lowering spring
1-2 of 2 Results
  1. Suspension Questions Chassis, Brakes, Shocks, Etc
    Hello Everyone, after a lot of hours and effort I finished rebuilding the front and rear suspension in my 57 Bel Air I finally have the car on the road. I installed 2" drop spindles, tubular control arms, stock height front springs, 2" drop Global West Leaf springs, relocated rear shocks, KYB...
  2. Suspension Questions Chassis, Brakes, Shocks, Etc
    I am finishing up the front suspension rebuild in my 57 and I am almost ready to start doing the rear end. I would like to drop the rear end by about 3 inches or so. I am unsure if I should just use lower blocks or lowering springs (i.e. GW L19 springs). Any thoughts on the ride difference...
1-2 of 2 Results
Top