Chevy Tri Five Forum banner
rack & pinion
1-6 of 6 Results
  1. Headers and Exhaust System
    Hi All, I apologize if this has been asked and answered but I'm stuck. I'm building a '55 Bel Air Sedan hot rod from the rails and I went the rack & pinion route. We mounted the dummy small block (front mount) and trans and when we put the headers on, we had clearance issues on the left side...
  2. Trifive Steering/Power & Manual/Rack & Pinion- 605
    Hey guys, First post I put on here. I bought a 56 sport coupe a few months ago and have been hitting it hard, I blasted the whole car, the frame and all the suspension and little parts and I am in the middle of powdercaoting everything and about to start putting it back together. My question is...
  3. Headers and Exhaust System
    Have a machine shop here building us a 383 with Vortec heads to go in front of a 200R4. At some point after the SBC goes in I'm going to yank the manual steering box and steering column and put in PS (likely R&P). (Yes, I know it'd be easier to do w/the engine out, but the budget won't support...
  4. Trifive Steering/Power & Manual/Rack & Pinion- 605
    After a couple surgeries and several months since I have laid a hand on my '57, I dusted her off today and opened a few boxes that have been laying unopened since they arrived back in the fall. I am listing the LS eng/trans combo as well as a list of parts I currently have in my possession and...
  5. Trifive Steering/Power & Manual/Rack & Pinion- 605
    I need an education on stock steering for a 57 2-dr. currently my build has standard steering (non power). but i have a stock power assist rack(?) complete with the original pump that bolts to the alternator. I would like some sort of power steering in my final product. I am going in with...
  6. Big Block Install Questions and Answers
    I bought Ecklers Classic Chevy BBC installation kit with rack & pinion and disc brakes for my '57. I was wondering if anyone else has had any issues with there kit? I bought it and the brakes were wrong and had to deal with them forever on that, then I learned today that they sent the wrong rack...
1-6 of 6 Results
Top