Chevy Tri Five Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Cooling Systems, Radiators, Fans / A/C
    It’s a 2 row cold case and it does not have mounting nuts welded on the inside of the flange so u can run the bolts thru the mounting Brackett and tighten them down to hold the radiator in place. No way to get my fingers or wrench in there to hold a nut while I tighten it. I’m sure others have...
  2. Cooling Systems, Radiators, Fans / A/C
    Hello everyone, first post here since my introduction so goes easy on me. Lol. I tried the search function but can’t seem to find the exact scenario. My 56’ is currently stock, with the Blue Flame 140 straight six and a manual transmission on the column…I am looking for a new radiator and need...
  3. Cooling Systems, Radiators, Fans / A/C
    Hello. Had a partial restoration done and upon final inspection found out when you close the hood the radiator cap makes an indentation in the hood and the hood is not aligned to the body panels. Any thoughts or ideas on potential solutions to fix this problem? The radiator is for a small block...
  4. Trifive Parts Classifieds
    Repro of OEM steel radiator for any trifive. Works great . no leaks. purchased new and used for one year until rebuild and swap out with an aluminum radiator. original cost was over $500
    $100 USD
  5. Trifive Parts Classifieds
    I have just completed a rebuild on a '56 sedan and have the following parts for sale: 55-56 PICK-UP ash tray complete - nicely restored & painted black - $SOLD 55,56,57 Radiator 4 tube brass construction - very nice no frame rust or tank damage - $150 55, 56, 57 Sedan windshield to dash garnish...
  6. Cooling Systems, Radiators, Fans / A/C
    Hi all, planning on upgrading my radiator and fan assembly for my '57 BelAir. This is my first big project on the car and hoping i will address my overheating issues as I move into the spring/summer. I've been looking at a couple options and was hoping for feedback or if there were things I...
  7. Super Stock/Pro Street & Modified Disc. 55-56-57
    Hello all, I am in need of help deciding the parts needed to get my 57 belair hardtop on the road. My dad bought the car in 58 and I am lucky enough to still have my dad at 85 years old. I am running out of time to take him for a drive in it. It's been 30 years since the car has been on the...
  8. Trifive Parts Classifieds
    I have just completed a rebuild on a '56 sedan and have the following parts for sale: 56 Headlight buckets with wiring grommets - brand new from Danchuk - $50 SOLD 55-56 PICK-UP ash tray complete - nicely restored & painted black - $50 55,56,57 Fuel tank pick-up and sender (5/16" line) - $20...
  9. Member Classifieds
    I have just completed a restoration on a '56 sedan and have the following parts for sale: 56 Headlight buckets with wiring grommets - brand new from Danchuk - $50 SOLD 55-56 PICK-UP ash tray complete - nicely restored & painted black - $50 55,56,57 Fuel tank pick-up and sender (5/16" line) - $20...
  10. LS & LT Installation Questions and Answers
    Hello fellow tri fivers! I'm looking to purchase a dual pass radiator setup for my 56 with an LS2, running Holley's mid mount accessory drive setup. I'm looking for a passenger side inlet and outlet. Let's see pics of what you guys are running!! Thanks in advance! bowtie-trifive
  11. Cooling Systems, Radiators, Fans / A/C
    Hi all, I am working on a 55 and am having trouble with my radiator fitment. I currently have a core support for the radiator in the V8 position but my radiator won't fit due to the accessory drive that I want to run. Wondering if anyone has any suggestions on how to make this fit. I am also...
  12. Cooling Systems, Radiators, Fans / A/C
    Hi all, Have my AC going and it does get cold! I am wondering though...how close should the condenser be in front of the radiator and still maintain effective cooling? Pictures will be appreciated...Vintage Air instructions do not indicate any distance suggestions... Thanks I advance, Rods56
  13. Stock Chevy Discussion 55-56-57
    not for any practical application i suppose, but im really curious as to what the specs were for the factory radiator that came with, say, a 57? were they 2 row or 4 row, what size were the tubes?
  14. Stock Chevy Discussion 55-56-57
    I'm currently using a stock PG behind a rebuilt 235 6cyl. Due to overheat incidents, I had a 3-row aluminum radiator custom built. When the manufacturer put the bungs in for the radiator cooler lines at the bottom of the radiator, he put one in so close to the harmonic balancer that the steel...
  15. Cooling Systems, Radiators, Fans / A/C
    The very bottom of my radiator has a circular indentation, which is dripping pretty bad. Is there supposed to be a plug or something? Its in the very center of the bottom of my factory original radiator
  16. Cooling Systems, Radiators, Fans / A/C
    Well as we all know, chasing radiators can be a full time job. Some love the eBay specials while others have not had the best outcome with those units. As well as you can spend $150 or $1500.... Well, I have decide to go with a Dewitts P/N 413012M. Just paced my order which is about 3 weeks out...
  17. Cooling Systems, Radiators, Fans / A/C
    I am going to be installing Vintage Air in my car, and as such i got a triple groove crankshaft pulley to be able to handle power steering later maybe if i want. Ive found by holding the new pulley up to the old one that the pulley will get in the way of the bottom radiator flow line. Ive been...
  18. Member Classifieds
    Hello fellow Tri-five members. My dad has a few things to sell that he didn't use on his latest build. I have put the auctions on eBay, but if you want to get a better deal we can just go straight through PayPal. Contact me here or just buy it on eBay if you want that added security. I have 100%...
  19. Cooling Systems, Radiators, Fans / A/C
    My Setup... Two Pictures... Running an all aluminum radiator with 700R-4 Transmission (with its own separate cooling system mounted under Rt rear floorboard with its own electric fan). As you can see I have lots of space between my fan pulley and my electric fan which is mounted under the top...
  20. Cooling Systems, Radiators, Fans / A/C
    I'm having trouble finding the radiator I want in stock. I don't want to wait the 3-6 weeks it will take to have it made and shipped. I have found the model I want but it has a transmission cooler. I have a stick and don't need the cooler. Can I use the radiator and just not hook up (or...
1-20 of 26 Results
Top