Chevy Tri Five Forum banner
sender
1-3 of 3 Results
  1. Cooling Systems, Radiators, Fans / A/C
    Hello, I am installing a Vintage Air AC/Heater unit on my 57 Chevy, which has a 305 SBC with a WEIAND 8120P STREET WARRIOR intake manifold. This intake has 2 water ports one 1/2 NPT on the passenger side and one 3/8 NPT on the driver side. The original sending unit is 1/2 NPT in size so I was...
  2. Fuel Systems/Injection, Carburation, Supercharging
    Y'all, In a bid to finally defeat vapor lock (see long version below*), I am planning to install a Tanks Inc. EFI tank with internal fuel pump, a fuel cooler, and a return line. I would like to install a Classic Instruments tube-style sender and am looking for folks' experience with these...
  3. Electrical Questions and Answers
    The fix is to add 33 ohm resistor to the sending unit. I just wanted to post this fix. After three guages and three sending units I ended up with the wrong sending unit. Long story and you know how it goes. So before I take the tank out again I used this fix. Fuel Guage 0-30 ohms and a 0-90...
1-3 of 3 Results
Top