Chevy Tri Five Forum banner
swaybar
1-6 of 6 Results
  1. Suspension Questions Chassis, Brakes, Shocks, Etc
    I was mocking up my CPP Front Sway Bar tonight on my 57 with my new CPP tubular control arms so I could mark where the holes needed for the brackets. The car was sitting on the floor and not on jack stands. The question I have is whether anyone has dealt with the sway bar sitting on the...
  2. Suspension Questions Chassis, Brakes, Shocks, Etc
    Put a CPP front sway bar on my 56 yesterday afternoon and I can't believe the difference. It's like night and day. All I could say taking it out for a test drive last night was WOW.
  3. Trifive Nomads, Sedan Deliveries & Station Wagons
    Hello Classic folks! I've just resumed my Nomad project I began long ago, and I have a short time frame to get it complete, so I need to make sure any mods I make are good ones, and don't have to be 'redone' 2 or 3 times. My car was originally a 6 cyl (235) with 3 spd OD and 4.11 rear end, and...
  4. Suspension Questions Chassis, Brakes, Shocks, Etc
    I am planning on using Wilwood's "zero" offset 11" front disc brakes on my '56 with stock wheels, spindles and springs (kit #140-11491). The calipers on this kit appear to be front-mounted. Does anyone know, with certainty, if a front sway bar will work with these brakes? I'd like to use the...
  5. Suspension Questions Chassis, Brakes, Shocks, Etc
    First post... Looking to put front disk brakes (manual) on my 57 Bel Air 2dr ht. I've got the 7/8" sway bars front & back from Ecklers installed. I've been looking at mgchevyparts brake kit, http://www.ebay.com/itm/190607644483?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 In the sales...
  6. Suspension Questions Chassis, Brakes, Shocks, Etc
    All, I need some photos or help. I have rebuilt the front end with the tubular lower and upper a arms (57 2dr hardtop) and I went to install my swaybar and realized that the "L" bracket that normally is used to install the ends of the sway bar to the arms wont work on the tubular arms. Anyone...
1-6 of 6 Results
Top