Chevy Tri Five Forum banner
welding
1-5 of 5 Results
  1. Super Stock/Pro Street & Modified Disc. 55-56-57
    My 55 210 2dr has been patched by a previous owner on the passenger side front floor pan. I purchased a replacement pan and need some advice on the steps and methods to get the old metal out and the new metal in. The floor pan is sandwiched between the front floor brace (danchuk #1380)and the...
  2. Welder advice, Hand tool Advice Shop Tool.
    Hey everyone, It's been a while since I have posted, but we just did a TIG Time video that I thought would be beneficial to some of the guys in this forum. Weld.com was at "The Last Run Car Show" last week in Ark City, KS giving welding lessons and doing weld repairs/ restorations for anyone...
  3. Welder advice, Hand tool Advice Shop Tool.
    Hey Everyone, For those of you getting into a 55 Chevy restoration, TIG Time has 2 videos on how to weld in new eyebrows. Check em out and tell me what you think. TIG Time Episode 22 - How to TIG Weld a 55 Chevy Restoration (Preparing & Tacking the Eyebrow)...
  4. Metal Fabrication and Repair Questions
    I cut out metal plugs for all the holes I wanted filled, and a larger one for the steering column hole . My question is can they be stitch welded every 1/4 inch, primed and filled with filler ? Or do they need to be welded solid all around ? My concern is patch becoming visable through paint...
  5. Welder advice, Hand tool Advice Shop Tool.
    A long time ago in a galaxy far away I was a Millwright apprentice. Unfortunately I never got any 'formal' welding training. Besides, they hadn't invented argon back then. 8:P There are plenty of JCs in the area that teach welding but classes move wwaaaaayyy to slowly for my tastes so I'm...
1-5 of 5 Results
Top