Hello everybody. This is my first step in this site. I have a 56 Nomad I got in 1969. It was all stock when I got it. I hot rodded it with a 62 Corvette motor and had lots of fun with. Now I want to restore it to almost stock again. I have a 1990 Caprice 350 motor with a roller cam and flat top pistons for it. The many years and miles put on it took a toll on the rear body where the shocks mount on the body (bad idea GM). Years ago I made a bar that works will on a sadan buy not on wagons. The wagons gas tank in in the way to use this bar. I would like to know if anybody makes a kit to mount the rear shocks to the frame for the Tri 5 Chevy Wagons. Thank you, TOM. [email protected]
56 Nomad
- Status
1 - 11 of 11 Posts
Joined
·
12,675 Posts
Hi Tom and Welcome to TriFive 
Good luck on the work with your Nomad :tu
Can't give you any tips on the shock bar but I'm sure someone else will... very soon
Post some pictures when you get a chance
Good luck on the work with your Nomad :tu
Can't give you any tips on the shock bar but I'm sure someone else will... very soon
Post some pictures when you get a chance
Joined
·
945 Posts
welcome tom and yes they do make that shock bar for s/w I have one on 57 s/w I got mine from ecklers all you need to know is what frame you have welded
or one piece .
or one piece .
Joined
·
5,829 Posts
Welcome Aboard Tom!
Joined
·
68,758 Posts
:hello: hi tom and welcome. good to have you here and nice intro. shock bars, www.danchuk.com.
Joined
·
19,596 Posts
WELCOME
:sign0016:to trifive Tom from another 56 owner:wavey: :anim_25:with the project... Later, Dave
:sign0016:to trifive Tom from another 56 owner:wavey: :anim_25:with the project... Later, Dave
1 - 11 of 11 Posts
- Status
Join the discussion
