Chevy Tri Five Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
745 Posts
Discussion Starter #1
I am sorting through the Stainless parts to see if I have the correct parts.I have two cars.The 2 door hard top is what I need to do now the 150 is done as for the snainless.Can anyone telll me how long the rear window upper stainless part is on a 2 door hardtop? the long one I have is 66 inchs and the short one is 65 but after ibstalling the lonest one it appers to be to short.
thanks Phil
 

·
Premium Member
Joined
·
989 Posts
Phil: I assume you mean the large rear window. I just measured my BA 2drhdtp and got 54 1/2 " total from where it goes under the L shaped corner pieces on each side. I don't know how far it slides under these corner trim pieces. Each of these corner L's are approximately 1 1/2" x 1 1/2" and cover over the large top trim and the slanted piece which runs down toward the rear quarter fin.

ken 57
 
1 - 4 of 4 Posts
Top