Chevy Tri Five Forum banner
1 - 1 of 8 Posts

· Registered
1,452 Posts
The stock length drive shaft will have to be shortened and the crossmember moved back some. You will need brackets for the TV cable setup either adapt a factory setup or go with a lokar or other aftermarket setup, also your carb may need a adapter to connect the tv cable to as the geometry for the tv attachment has to be right for the tv to work properly and not burn up the transmission.

Regards, Robert
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.