Chevy Tri Five Forum banner

correct hose connection for flow?

1169 Views 0 Replies 1 Participant Last post by  nitrouspro
I have a genIV 454, with a blower manifold, and no heater. I have plugged the two small openings at the water pump, and ran a crossover hose from one rear manifold hose bib to the other side bib (over the distributor). I'm curious if I am impeding the water flow through the heads by doing this. Any ideas? Thanks
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.