[vero 56]

Hello, I have a 56 210 that I have owned since the 80s. The car is from Grand Rapids. It was customized in the 60s or 70s with tunnelled headlights and the front end was rolled. It was a one of a kind look. The car/ drivetrain has evolved over the years. Now I am changing it over to a gasser look, none in town. I have a one piece frame. Looking at where people have cut the frame on other gassers I see that the frames are squared off. My frame has a pinch in the top and lower outside corners. Does the one piece frame need to be cut back into the steering box area? I was going to reuse my box, but will modify if necessary. This is a geat website full of knowledge. Thanks John

 

[MightyMouse57]

Welcome aboard!!:sign0016:

I can't help with your questions but someone here will soon I'm sure. This is a great place for tri-five questions.

Glad you found us

 

[Will]

I know very little about gasser builds, so I'll let someone else answer your questions. But I want to welcome you to trifive! :shakehands:

 

[carls 56]

:hello: hi john and welcome. good to have you here and nice intro. might want to start a new post in the gasser area on the homepge (no big deal this way. :five.

 

[anderssonbros]

Hi John and Welcome to TriFive
Good luck on your project :tu

 

[petes83usa]

Hi John...Check out the Nicky Chicago post ...he just joined up also and u will find everything u need over there , also look at Speedway Motors.... :bowtieb:

 

[Kiwi56]

Hello John
welcome aboard
enjoy...

 

[belairdave]

WELCOME

:sign0016:to trifive John from another 56 owner:shakehands: :anim_25:with the 56... Later, DAVE

 

[angs1957]

Hi and welcome :hello: