Chevy Tri Five Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
176 Posts
Discussion Starter · #1 ·
I need to know how to put a dimple in coated headers without damaging them too much.

I was going to heat them and try that. I know that whatever I do will discolor them but I can live with that.
 

·
Registered
Joined
·
1,424 Posts
I use a ball peen hammer. I place the rounded tip on the area I want to dimple and then smack the the flat side with a big hammer. This has worked for me over the years.
 

·
Registered
Joined
·
176 Posts
Discussion Starter · #4 ·
Thanks for the info guys. I just adjusted them with a big hammer and they didn't crack or anything. I am in the process of installing a 600 box in my 55 with a big block and didn't have much room.

thanks again
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top