Chevy Tri Five Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
399 Posts
Discussion Starter · #1 ·
I put a new intake on my engine while it was out of the car. I used a stock distributor a point type. I just had the engine installed. I needed to remove the distributor and it will not come out. I can lift it up several inches but it binds up and will not come out. I think its hanging up in the intake. I took the intake loose and I can lift it up but the dist is still stuck
 
1 - 3 of 3 Posts
Top