Chevy Tri Five Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,830 Posts
Discussion Starter · #1 ·
have about finished the fab work on the core support to isolate the PWM fan system.
The goal is to force the fan to pull only the air available thru the ac condenser and rad core.
No "bypass" flow.
Here are some pics of the project. They are in random display.
More to be added once the rad and support is mounted in the car.
The "Nevada" shaped opening on the dr side is a cold air inlet. It will have a stainless mesh insert and the air cleaner will be isolated from the fan wash.
Any questions, just ask

Automotive tire Automotive lighting Motor vehicle Bumper Tread
Hood Grille Motor vehicle Bumper Automotive exterior
Motor vehicle Hood Automotive tire Bumper Automotive exterior
Asphalt Road surface Motor vehicle Bumper Automotive exterior
Shoe Wood Gas Road surface Stairs
Motor vehicle Automotive tire Automotive exterior Vehicle door Automotive lighting
Wood Gas Automotive exterior Tints and shades Asphalt
Automotive tire Automotive lighting Motor vehicle Bumper Tread

Shoe Wood Gas Road surface Stairs

Motor vehicle Automotive tire Automotive exterior Vehicle door Automotive lighting

Wood Gas Automotive exterior Tints and shades Asphalt

Motor vehicle Hood Automotive tire Bumper Automotive exterior

Asphalt Road surface Motor vehicle Bumper Automotive exterior

Hood Grille Motor vehicle Bumper Automotive exterior
 
1 - 1 of 1 Posts
Top