Chevy Tri Five Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4,131 Posts
I've seen this on street rods.
That could possibly be a custom SS tube with some shorty hoses on the ends.
Down side is reduced flexibility during engine movement with all deflections taken up in the shorty hoses.
If it is commercial maybe someone will chime in with a vendor and product number.
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #4 ·
Custom made with some Exhaust pipe and a couple of Gates Power grip hose shrinks.. Off to the chrome shop.Their hasn't been a big diesel rig made with screw hose clamps in years.
View attachment 365815

View attachment 365821
Thank you. I found 1-1/2" aluminum pipe. I could have that bent by a local exhaust shop. Then polish it out and use the Gates shrink clamps to connect. Perfect!
 
1 - 4 of 4 Posts
Top