Chevy Tri Five Forum banner

Motor mounts / trans mount

1382 Views 8 Replies 6 Participants Last post by  dcs13
Ok, I have read a LOT of archives and can't seem to narrow my search down.

On my 55 what is the best motor mount to install for a small block? I see a lot of vendors have them, but which are best? I think I'd like the weld in versions. I saw a vendor (can't find it now) that had a nice set that incorporated a piece that welded in where the crossmember met the side frame rails. That looked nice, but I can't find it now.
Plan on running a muncie 4 speed. will need a cross member as well.
1 - 1 of 9 Posts
The Williams mounts are the weld in type that bridge the crossmember and frame rail as you describe.

And unlike some others, they fit.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.