[cooltx]

Hey guys, I got a '56 sedan 2 door. Anybody got a tip on how to get the vent window out of of the frame without damaging anything or breaking the glass. I'm getting new glass cut. thanks

 

[cooltx]

just found an old thread by Chevy Chase. thanks again trifive.

 

[chevman57]

Hey neighbor. If you need any help holler.
Terry

 

[Pops @ Tri-5.com]

CoolTx...How 'bout posting a link to the thread?

 

[tjsdelivery]

Use a screwdriver on the end openings on each side and work it out. If you bend the frame open some, close it by rebending once the glass is out.

 

[3 Tri-Fives]

Heat the frame with a propane torch. It will melt the rubber and you can easily remove the glass while hot. This will ruin the glass but you said that you are replacing. Good luck!