Chevy Tri Five Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
Hi, Fellas I was wondering if you can install a factory posi unit in a non- "P" case. any mods have to be done? Thanks in advance!:D Scott
 

·
Registered
Joined
·
688 Posts
Yes you can, you will need the posi unit though and some 55/56 you can do it with no mods but on the 57 there is a gusset that you need to grind down, or if that gusset is in the one your trying to do it will have to come out some, if you need some pics let me know and when I get home I'll post them

most of the pumpkins from 55 to 64 I think are the same
 

·
Registered
Joined
·
688 Posts
If it looks like this, your all set



if this is what you have



then you will have to grind the long gusset down, you dont need to go as far as I did

 
1 - 5 of 5 Posts
Top