Chevy Tri Five Forum banner
1 - 1 of 12 Posts

· Registered
88 Posts
I know DANCHUK (not JUNK) had some bad ones go out with some bad heat treating. They just started making these cause one of there suppliers changed there design. Anyway! If you have some that broke on you then you should tell them so they can swap them out for you. I think it's there pn# 247. I had some that came up too short and they swapped them out for me and then the next time I came in they asked if I had any of them break on me, cause one of their batches didn't get heat treated properly which caused the clip to break when installed.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.