Chevy Tri Five Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2,611 Posts
Discussion Starter · #1 ·
These new blades that have cut groves on each end. Are they good for mulching. If so would I get a low or high lift blade. Don't know if there is a medium lift blade.
 

·
Registered
Joined
·
2,334 Posts
Have never had much luck with mulching blades.
Have a rider but my system should work with a pusher.
I cut continuously clockwise, discharge chute is wired up to eliminate wind rows for the next pass. The clippings are continually cut / mulched when I get to center I make several clean up passes.
I use high lift blades.
Luck
 
1 - 2 of 2 Posts
Top