Chevy Tri Five Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
38,555 Posts
Do a search, it's been discussed several times.

You have 2 potential problems going this route.

1. Finding those bearings in stock somewhere.
2. If you find them, the price will likely be pretty high.

To me it's far better to switch to the 61-68 hubs/bearings/seals. If you can find a set of hubs, the new bearings are dirt cheap compared to the stock ball bearings or the special rollers that fit the stock hubs.

Try Ebay, Craigslist, vintage salvage yards. Those hubs are out there. If you are patient, you'll come out better.

Of course even better is a proper disc brake conversion.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Looks like we ran into some issues. Please come back and try again later
Top